SELFIE LED LIGHT WITH REMOTE CONTROL
CLI-3010-LG
4
Assembly
A
C
1
Loosen the plastic sleeve and unfold the tripod legs. Choose a suitable
position with the highest possible stability and tighten the plastic sleeve.
2
Loosen the upper plastic sleeves to adjust the height of the tripod
according to your requirements. Then retighten these sleeves.
3
Please, at first make sure the tripod is stable, and only then mount the
light on the tripod.
1
2
CONNECT IT®️ is a registered trade mark
3
R202202-IM-CLI3010
USER MANUAL
EN
4