Removing The Rechargeable Batteries - Philips Sonicare CleanCare 5000-Serie Bedienungsanleitung

EnglisH
14
- Do not throw away the appliance with the normal
household waste at the end of its life, but hand
it in at an official collection point for recycling. By
doing this, you help to preserve the environment.

removing the rechargeable batteries

This process is not reversible.
To remove the batteries yourself, you need a flat-
head (standard) screwdriver.
1 Remove the toothbrush from the charger,
switch it on and let it run until it stops.
Continue to switch on the Sonicare until the
batteries are completely empty.
2 Insert a screwdriver into one of the slots that
are located near the top part of the handle.
Push the screwdriver blade into the handle
as far as it goes and twist the blade. The
housing begins to split.
3 Remove the screwdriver and apply the above
instruction to the other slot, which is located
on the opposite side of the handle. Twist the
blade to split the rest of the housing.
4 Now insert the screwdriver into the middle
slot, which is located on the top front part of
the handle, as shown. Push the blade in as far as
it goes.