Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Tracking force adjustment
BALANCE
WEIGHT
The tracking force adjustment should be done before
playing.
The tracking force must be adjusted to the
SCALE RING
recommended
value as shown
on the instruction
sheet of the cartridge.
INDICATION LINE
* Rotate the BALANCE WEIGHT until the tone
arm is balanced evenly.
* When the tone arm is balanced evenly turn the
SCALE RING alone until the "0"? on the SCALE
RING of the BALANCE WEIGHT is set over the
INDICATION LINE.
The tone arm is now set at
zero gram.
Turn the BALANCE
WEIGHT
slowly until the
INDICATION LINE comes to the specified force.
The stylus tip will then be adjusted to the dered
tracking force.
ANTI-SKATING
KNOB
Match the anti-skating dial to the indicated line in
accordance with the tracking force of the cartidge
used.
PITCH CONTROL
KNOB
Pitch control
should be done while watching the
stroboscope installed at the periphery of the plater.
Turn the pitch control knob slowly until the stipes
on the stroboscope appear still.
Turn the kno) in
the F direction when the stripes flow rightward,and
HEAD
SHELL
in the S direction when the flow leftward.
(CARTRIDGE
EXCLUDED
IN U.S.A.)
Perform installation or replacement of the cartridge
as follows.
,
* Attach
the
cartridge
to the head
shell with
cartridge fixing screws.
The polarities and L,R channel of the lead wire of
the
head
shell are shown
in Fig.
4.
The
ARM LIFTER & AUTO CUT LEVER
connection
should
be done
according
to the
* Arm lifter simultaneously used as auto-cut leve
terminal indication of the cartridge.
This lever has 3 change-over positions- UP, DOVN,
Stylus Replacement
CUT.
When sound becomes distorted or noisy, check the
When starting play
stylus to see whether it is worn out or not. If worn
Remove the tone arm from its arm rest and seithe
out, replace it with new one.
lever to "UP",
then the tone
arm
will rise
gradually.
When the tone arm is moved alove
the record, the turntable starts to rotate.
R© Green
When the lever is set to "DOWN"', the toneirrm
fe
gradually lowers and play starts.
To stop play halfway across a record (Auto-cu)
Pull the lever towards CUT and release your hndl.
The tone arm automatically returns
to theirrn
rest and the power to the player
is cut off.
.
To stop playing for a while
L® white
Set the lever to "UP", and the tone
arm iise's
gradually and the record stops playing.
SPEED CHANGE-OVER
LEVER
The speed is changed to 33-1/3 or 45 rpm.
Werbung
