SACKit WOOFit S Bedienungsanleitung Seite 7

If "SACKit" does not appear on the
list of found devices, the connection
process must be started over. Note
that the two units should be in one
meter radius of each other during the
connection.
3. Choose the "SACKit" connection on
your Bluetooth device.
4. When the connection is established
the light indicator will flash slowly in
the colour blue. Next time the WOOFit
S speaker get turned on, a connection
will automatically be made with the last
paired device.
5.Notice: If passcode* input is
demanded on your Bluetooth device
enter "0000". Passcode may also appear
under the synonyms as; " Passkey ", "Pin
Number" or "Password"
Phone call
If music is playing when in the Bluetooth
mode and you have an incoming call,
WOOFit S will automatically switch to
hands-free mode. Press the Play/Pause
button to accept the call. To hang up
press the Play/Pause button again. Two
short pushes on the Play/Pause button
will make WOOFit S redial.
UK
6