Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REPLACING
KEYCAPS
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Before installing switches,
be sure the pins are clean and straight.
Included
Tools
Switch
Puller
Keycap Puller
Remove
Switches
I. Grab your Switch Rernoval Tool and align the gripping teeth
vertically (on the Y-Axis) at the center of the switch, as shown
the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until
the switch releases
from the plate,
3. Using firm but gentle force pull the switch away from the
keyboard using a vertical motion.
Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessiveforce when replacing
keycaps or switches.
If you cannot remove or install keycaps or switches please contact customer
damage to the keyboard
due to operating
AND
SWITCHES
Mechanical
Switch
Example Of a switch
as seen from top
after you remove the
keycap to prepare for
switch
removal.
The Switch Puller tool aligns Vertically
unclip the plastic securing the switch to the plate.
Install
Switches
Check that all the switch metallic pins are perfect y straight and clean.
2.
Align the switch vertically to have the Gateron logo facing north. The
pins shou d align themselves
3.
press the switch down until you hear a click. This means your switch
clips have attached themselves
4.
Inspect the switch to ensure It's properly attached to your keyboard.
and test
it
errors.
Push Straight
Down
Please be gentle. Be sure
the pins are aligned with
the slots.
Logo
EPOMAKER
Switch
Shaft
to the Switch to
to the keyboard PBC.
to the keyboard
plate.
service as soon as possible to avoid
TECHNICAL
ASSISTANCE
For technical assistance,
please email to
support@epomaker.com
with your purchase
a detailed description
Of your issue.
We normally
respond to enquiries within 24 hours. If you
purchased
your keyboard
from a distributor
official store Of Epomaker, please contact
them directly for any
additional
help.
COMMUNITY
FORUMS
Join our community
and learn together with
other keyboard
enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/
WARRANTY
EPOMAKER's Warranty
covers any factory defects
affect
the proper
functiona
ity of your purchase.
cover any damage that may occur from normal wear and tear.
If your product
is defective
we will send you a replacement
unit.
Replacement
units
might
require
defective
unit back to Epomaker.
We provide a 1 year warranty
for our products
from our website
(EPOMAKER.com).
Your item
covered
by your 1 year warranty
if the inspection
sign of modification
or changes
unsupported
product,
these
include:
Changing
internal
Assembling
and
reassembling
the
product,
Batteries,
etc.
We will ONLY cover the item if it is bought
stores. You do not have a warranty
with us if you bought
item
from
another
reseller
or likewise.
Please
that you bought
your product
from to resolve issues.
order number
and
or not from any
that might
It doesn't
you
to
send
the
when bought
will not be
shows any
by the original
components,
Replacing
from our official
the
contact
the store
Werbung
