KiiBOOM Phantom 68 Bedienungsanleitung Seite 3

PAIRING BLUETOOTH
Long Press for 3 seconds to pair Bluetooth device
FN + Q/W/E
FN + Q/W/E Short Press to switch to last paired device
After turning on the keyboard, please switch to Bluetooth mode by pressing the designated button. Use the
FN+Q/W/E keys to enter the desired Bluetooth channel (1, 2, or 3). To initiate device pairing, press and hold
the FN+Q/W/E keys for 3 seconds. When the keyboard starts searching for a connectable device, the
indicator light will flash red, blue, or yellow. Once the keyboard is successfully connected to a device, the
indicator light will remain on for 2 seconds. If the keyboard fails to connect to a device, the indicator light
will turn off.
PAIRING WIRELESS 2.4GHz
Long Press for 3 seconds to pair Wireless 2.4G
FN + R
Switch to Wireless Mode
FN + R
After turning on the keyboard, switch to 2.4G mode using the power switch, and then long press the FN+R
keys to enter pairing mode. After inserting the receiver, the indicator light will flash rapidly to indicate that
the keyboard is searching for a compatible device to pair with. Once the pairing is successful, the mode
light will remain on for 2 seconds. If the keyboard cannot find a pairing device within 30 seconds, the
pairing mode will exit, and the mode light will turn off. At this point, the keyboard will enter sleep mode.
CHECK THE BATTERY LEVEL
Pressing the FN+Backspace key combination will turn off the backlight on the keyboard in order to
check the battery level. To display the remaining battery percentage, press the number keys 1 through
0. For example, if the 1 key is lit, it indicates that the battery has 10% remaining. If both the 1 and 2 keys
are lit, it indicates that the battery has 20% remaining, and so on. The number keys will light up with
different colors to indicate the battery level: red for 30% or less, yellow for 50% or less, and green for
over 50%.
DO YOU NEED ANY MORE HELP?
For technical assistance, please email to support@kiiboom.com with your purchase
order number and a detailed description of your issue.