Getting Started; Battery Charging - Modecom Volcano Blaze Schnellstartanleitung

VOLCANO BLAZE VR SET
6. Getting started
6.1 Battery & charging
The battery inside the gamepad is integrated with the hardware. Do
not attempt to remove or replace the battery. This will violate warranty
terms.
The led light will turn red when the battery will need charging. Connect to
USB port in PC via USB cable or to 5V adapter to charge the battery. A full
charge takes about 1.5 hours. When charging the led light will turn red.
When battery is fully charged the led light will turn off. After charging is
completed please remove the USB cable.
6.2 Turn on/off
To turn on - press and hold Start/Power button for 3 sec. You will see the
led light flashing in blue.
To turn off - press and hold Start/Power button for 3 sec. You will see
the led light disappear. The device will power off automatically after 3
minutes if no Bluetooth connection is established.
6.2.1 Connecting to smartphone / tablet
To connect first turn on the gamepad. Then turn on Bluetooth in your An-
droid device Settings menu. Start scanning for Bluetooth devices nearby.
Select the gamepad to pair. Connection will be established automatically
and the led light will turn off.
6.2.2 Modes
The gamepad has two modes.
One mode is Gamepad (switch in Game position) mode meant for playing
games which support external Bluetooth controller. Please make sure the
game you want to play supports gamepads. Please remember that you
might need to select gamepad control in game settings and/or to assign
specific buttons for specific game functions.
Second is Remote Controller (switch in Key position) mode meant to
remotely control various Android device functions including Camera
shutter, Volume, Music/Video and wireless mouse cursor operations. For
detailed description please refer to Part 1: Keys and functions.