Herunterladen Diese Seite drucken

Panasonic TX-1703MA Serie Bedienungsanleitung Seite 11

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Adjustment of Screen Angle
Adjust a screen angle of this display when it is difficult to see the screen due to the reflection of light.
«Adjustment range of angle>
Sideways: 90° both to the right and left
Upward: 15°
`
Downward: 5°
Troubleshooting
If the display unit malfunctions, check the following items before enquiring about repairs. If the abnor-
mality cannot be fixed, please call the dealer where you purchased the display unit.
Cause
Measure
Trouble condition
Image is not displayed
Color of image on
screen is abnormal.
Picture runs
Control buttons do
not work
Picture
is small
and
Control buttons do not
work.
. Is the power cord connected?
Is the power switch ON?
Is the signal cable properly connected?
Is the signal connector select switch
properly set?
Is the Brightness or contrast adjustment
knob turned all the way to the end?
Is there a magnetized item near?
Did you change the direction of the
screen during operation?
Is the pin arrangement of the signal con-
nector correct?
Is the signal cable connected properly?
Are there signals, which are outside of
the required frequency range?
Is the pin arrangement of the signal con-
nector correct?
Is the signal cable correctly connected?
Are you pressing two or more buttons si-
multaneously?
Are there signals, which are out side of
the required frequency range?
Are there signals, which are outside of
the required frequency range?
Connect the power cord.
Turn on the power switch.
Connect the signal cable correctly.
Set the signal connector select switch
correctly.
Adjust the Brightness and contrast at the
desired levels.
Move the magnetized itme away.
Press the degaussing switch.
Use a signal connector which matches
the pin arrangement.
Connect the signal cable correctly.
Input signals which are within the fre-
quency range.
Use the signal connector which matches
the pin arrangement,
Connect the signal cable correctly.
Press only one button at a time.
Input signals which are within the fre-
quency range.
Input signals which are within the fre-
quency range.

Werbung

loading

Diese Anleitung auch für:

Tx-2013ma serieTx-2103ma serie