TOOLCRAFT 2899813 Bedienungsanleitung Seite 3

Operating Instructions
USB-C® Rechargeable LED Work Light
Item no: 2899813
1 Intended use
The product is a USB-C® rechargeable LED work light with magnetic clip and base. The
product has three light sources including a UV light.
Notes:
– The product has an IP43 ingress protection rating.
– The product can resist water splashing against the enclosure from any direction.
– Do not submerge!
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers
Forum.
2 Delivery contents
■
Product
■
USB-A to USB-C® charging cable
3 Operating instructions
Download the latest operating instructions from
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can lead to personal injury.
This product is constructed according to protection class III.
Read the operating instructions carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the
product.
3
■
Operating instructions
www.conrad.com/downloads or scan the QR
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-
eration can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Li-ion battery
■
The rechargeable battery is permanently built into the product and cannot be replaced.
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable bat-
tery might cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or
the product into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due
to the rechargeable battery technology being used, you do not need to discharge the re-
chargeable battery first.
■
Never charge the rechargeable battery of the product unattended.
■
When charging, place the product on a surface that is not heat-sensitive. It is normal that
a certain amount of heat is generated during charging.
5.6 LED / UV light
■
Do not look directly into the LED / UV light!
■
Do not look into the beam directly or with optical instruments!
■
Avoid exposing your skin to UV light for extended periods of time.
5.7 Top light (LED type: XPE)
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
Possibly hazardous optical radiation emitted from this product.
The scope of delivery includes LED notice signs in different languages. If the notice sign on
the product is not in your local language, attach the corresponding sign to your device.
6 Recharge the battery
Important:
For effective protection against ingress, make sure the charging port cover is properly
sealed.
1. Open the charging port cover.
2. Connect one end of the charging cable to the charging input on the product.
3. Connect the other end to a suitable power adaptor.
7 LED status indicator
LED status Description
Red ON Charging in progress
Green ON Charging complete
8 Operation
Press the power button repeatedly to toggle through modes:
Top light (ON) → side light (high) → side light (low) → UV light ON → OFF
9 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
Risk Group 2
CAUTION