Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Introduction
PIR-926 is a solar-powered motion detector utilizing a single
passive infrared element and microwave technology. It consists of
digital dual-core fuzzy logic infrared control chip and intelligent
analysis which could effectively identify interference signals from
body movement signals so as to reduce false alarms. The detector
is battery powered and kept re-charging by the solar panel to
save energy. Unique housing material and structure improve its
waterproof level for outdoor use. Only after being connected
successfully with alarm system, the detector can work normally.
Features
1. Accurate detection
■
It has microwave and infrared dual detections to prevent false
alarms.
■
It consists of digital dual-core fuzzy logic infrared control chip and
intelligent analysis which could effectively identify interference
signals from body movement signals.
■
With automatic temperature compensation and anti-air turbulence
technology, it easily adapts to environmental changes.
2. Outdoor use
It adopts ABS and anti-UV materials for outdoor use with IP65
rating.
3. Energy saving
■
Rechargeable by solar power.
■
Energy saving mode to reduce battery charging times, and
extending battery life.
All manuals and user guides at all-guides.com
Product Overview
Solar Panel
LED Indicator
Detection Lens
Detector
LED Indication
LED Status
Red and orange LEDs flash
Self-testing
continuously for 1 min
Red LED flashes once
Infrared is triggered
Orange LED flashes once
Microwave is triggered
Both infrared and microwave
Red and orange LEDs flash once
are triggered, the detector
at the same time
sends alarm signal.
Red LED flash 3 times every
Low battery. Please install on
12 seconds
place with sufficient sunlight
EN
Fixing Screw
Base
Installation Bracket
Meaning
Werbung
