Herunterladen Diese Seite drucken

Werbung

All manuals and user guides at all-guides.com
BOSCH
StVZO

Werbung

loading

Inhaltszusammenfassung für Lupine SL

  • Seite 1 All manuals and user guides at all-guides.com BOSCH StVZO...
  • Seite 2 all-gu ides.
  • Seite 3 Heat generation: Das Gehäuse der SL kann heiß werden, achten Sie deshalb immer auf The housing of SL may heat up; so make sure that you always keep ausreichenden Abstand zu brennbaren Materialien. Der ruhende Be- the light at a safe distance to any combustible or flammable materials.
  • Seite 4 Führen Sie diese Schritte auch auf der anderen Seite durch. 1. First, remove one of the existing Bosch holder arms and the two screws. Install the supplied holder arm of the SL instead of the original Bosch holder. To do this, use of the original Bosch holder screws.
  • Seite 5 2 cm 3. Längen (2 cm) und isolieren (3-4 mm) Sie das Original Bosch Lichtkabel ab. 4. Bevor Sie das Lichtkabel mit der SL verbinden, fädeln Sie bitte die schwarze Ein Verzinnen des Kabels ist nicht notwendig. Kabeltülle auf das Lichtkabel auf. Achten Sie bitte darauf, dass der runde Kragen der schwarzen Kabeltülle zu Ihnen zeigt.
  • Seite 6 Kabeltülle richtig zu positionieren. markiert ist. (+ rotes Kabel, - schwarzes Kabel) 6. Attach the end cap back onto the back of the SL. (Max. torque: 1 Nm) 5. Now position the two cable strands in the cable clamps and tighten them.
  • Seite 7 3 bzw. Bosch Displays anzupassen. Werkseinstellung: ca. 3 Sek. 16 Sek. 7. Now screw on the SL to the two brackets on the Bosch display. To do this, Sensorkalibrierung 3x aufleuchtet Speichert den gemessenen use to the supplied holder screws and a T15 Torx.
  • Seite 8 all-guides.co...
  • Seite 9 The headlight only can be mounted on bicycles with pedal assistance with DC pressed (let go to power supply if they come with their own control unit (battery charge indicator) to SL select) and an automatic Motor cut-off to avoid a deep discharge of the battery. Light illuminates in power mode...
  • Seite 10 Bosch activated at the Bosch software. dealer. Der Lichteingang ist in Lichteingang beim Bosch   der Bosch Software Händler freischalten nicht freigeschalten. lassen. More informations at www.lupine.de EC Declaration of Conformity: www.lupine.de/ce/ Mehr Informationen unter www.lupine.de EG Konformitätserklärung: www.lupine.de/ce/...
  • Seite 11 Technische Daten Technical Data All manuals and user guides at all-guides.com 12 V Betrieb 900 Lumen 12 V mode 900 Lumens 6 V Betrieb 500 Lumen 6 V mode 500 Lumens Stromverbrauch Nachtfahrlicht 16 Watt Max. Full beam 16 Watt max. Stromverbrauch Tagfahrlichtfunktion 3 Watt Daytime running light...
  • Seite 12 Notizen Notes All manuals and user guides at all-guides.com...
  • Seite 13 All manuals and user guides at all-guides.com Lupine Lighting Systems GmbH Phone: +49 (0) 91 81 - 50 94 90 Winnberger Weg 11 Fax: +49 (0) 91 81 - 50 94 915 92318 Neumarkt E-mail: info@lupine.de www.lupine.de Germany...
  • Seite 14 all-gu ides.