Werbung
ASSEMBLY PREPARATION
Manual del usuario
Please check local building codes regarding footings, location and other
requirements before beginning construction. Study and understand this owner's
manual of important information and helpful tips for easier and more enjoyable
assembly.
Assembly instructions:
Reviewing all instructions and the appropriate information before you begin, make
sure following the step sequence carefully for successful results.
If no base:
A strong plastic sheet (thickness: at least 150μm) should be placed under the
foundation to assist in reducing rising dampness from the soil, thus reducing
condensation build up in the shed. Your storage building must be anchored to
prevent wind damage. Once secured, it is highly recommended applying silicone
along the inside of the base rail to minimize condensation.
Parts and Parts List:
Before you start, separate and identify all the parts and hardware to be sure that
you have all the necessary parts for your building (refer to the Parts List Page).
If you find that a part is missing, please notify the seller within one week after
receiving the product.Do not attempt to assemble the building if parts are missing
because any building left partially assembled may be seriously damaged by light
winds.
( Please tear off the safety protection layer before the assembly, keep the part
number label if needed )
Safety must be put in the No. 1 position:
1 Select a dry and calm day for your assembly. Team works ( Two or more people )
are required during the assembly;
2 Wearing safety gloves, eye protection and long sleeves during the assembly to
prevent injury; Pay attention to the sharp edge of some parts;
3 Children and pets are not allowed entering into the construction site;
4 Never concentrate your total weight on the roof of the building. When using a step
ladder make sure that it is safety;
Care & Maintenance:
1 Keep the shed clean with soft cloth, use water if necessary;
2 Keep the door tracks clear of dirt and other stuff that prevent them from sliding
easily.
3 Clean the snow with necessary tools to make sure it is safe to enter into; Heavy
snow may cause collapse, please make sure safety before entering into.
4 The shed is not made for living but storing stuff.
5 Please add some oil on the top and bottom door sliding channel to make door
slides smoothly.
2
Werbung
