STARTEC ARMSTSCP1 Bedienungsanleitung
Inhaltsverzeichnis
Quicklinks
Sit-Stand Arm - Single Monitor
ARMSTSCP1
*actual product may vary from photos
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
JP: 取扱説明書 - jp.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 11/20/2019
Inhaltsverzeichnis
Inhaltszusammenfassung für STARTEC ARMSTSCP1
- Seite 1 Sit-Stand Arm - Single Monitor ARMSTSCP1 *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com JP: 取扱説明書...
- Seite 2 Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries. This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com.
- Seite 3 Warning statements Dichiarazioni di avvertenza Make sure that you assemble this product according to the instructions. Assicurarsi di Assemblare il prodotto secondo le istruzioni. Read the entire manual and make sure that you understand the instructions before you start to Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare assemble and use this product.
- Seite 4 注意 必ず取扱説明書に従って本製品の組み立てを行って下さい。 最初に取扱説明書を最後まで読み、 本製品の組み立て方をすべて理解してから組み立て作業を 始めて下さい。 本製品は、 室内での使用を想定しています。 戸外では使用しないで下さい。 本製品は、 二人がかりでの組み立てを想定しています。 手助けなしに単独で組み立てと設置を行 わないで下さい。 モニタの重量が本製品の最大積載重量を超えないようにして下さい。 最大積載重量をオーバーした場 合、 怪我をする恐れや器物破損の恐れがあります。 グロメッ ト固定方式を使用した場合のモニタアームの耐荷重 : 2-8 kg. グロメッ ト固定方式を使用した場合のキーボードトレイの耐荷重 : 2.5 kg. クランプ固定方式を使用した場合のモニタアームの耐荷重 : 2-8 kg. クランプ固定方式を使用した場合のキーボードトレイの耐荷重 : 1.5 kg. 反動注意 ！ 本製品には、 リフト機構が組み込まれており、 積載した装置を取り外すと反動で急激に上昇 する可能性があります。 装置を取り外す前に、 本製品を最も高い位置に移動させて下さい。 この操作を 怠ると怪我をする恐れや器物破損の恐れがあります。...
-
Seite 5: Inhaltsverzeichnis
Attach the adhesive strip ........................38 Route cables ..............................39 Remove the monitor ................40 Adjusting the ARMSTSCP1..............41 Adjust the tilt angle of the monitor ....................41 Adjust the tilt angle of the keyboard tray ..................42 Counterbalance the weight of the monitor ..................43 Counterbalance the weight of the workstation ................ - Seite 6 Clean the keyboard tray ................47 Technical support ...................48 Warranty information ................48 Instruction manual...
-
Seite 7: Product Dimensions
Product dimensions Max 940 mm (37 in.) 351 mm to 530 mm 408.7 mm (16.1 in.) (13.8 in. to 20.9 in.) 166 mm (6.5 in.) 32.5 mm (1.3 in.) 8 mm to 50 mm (0.3 in. to 19.6 in.) 124 mm (4.9 in.) 88 mm (3.5 in.) - Seite 8 773.2 mm (30.4 in.) 285 mm (11.2 in.) 100 mm (3.9 in.) 75 mm (2.9 in.) 4.5 mm (0.2 in.) Instruction manual...
- Seite 9 8 to 217 mm 8 to 217 mm 449 mm (17.7 in.) (0.3 in. to 8.5 in.) (0.3 in. to 8.5 in.) 668 mm (26.3 in.) 530 mm (20.9 in.) 351 mm (13.8 in.) 489 mm (19.2 in.) Instruction manual...
-
Seite 10: Product Diagram
Product diagram Grommet feature pictured VESA monitor mount Column Monitor arm Keyboard tray Base Instruction manual... -
Seite 11: Technical Specifications
Technical specifications Type of measurement Measurement 75 x 75 mm 100 x 100 mm VESA -5° to +35° Tilt (monitor) 0° to +90° Tilt (keyboard) 360° Pivot (monitor) +/-90° Swivel (monitor arm) Instruction manual... - Seite 12 Type of measurement Measurement 24 in. or less Supported monitor size 4.4 to 17.6 lb. (2 to 8 kg) Supported weight of the monitor arm when you use the desk clamp 3.3 lb. (1.5 kg) Supported weight of the keyboard tray when you use the desk clamp 4.4 to 17.6 lb.
-
Seite 13: Package Contents
Package contents Monitor arm Keyboard tray Qty: One Qty: One Column VESA monitor mount Qty: One Qty: One Base Adhesive strip Qty: One Qty: Two Instruction manual... - Seite 14 Socket driver 6 mm hex key Qty: One Qty: One M6x10 mm screw M8x20 mm screws Qty: Three Qty: One Metal washer Plastic washer Qty: One Qty: One Instruction manual...
- Seite 15 Basic screw M6x25 mm screws Qty: Two Qty: Four 5 mm hex key M6x12 mm screw Qty: One Qty: Four M4x10 mm hex key 2.5 mm hex key Qty: Four Qty: One Instruction manual...
- Seite 16 M6x8 mm screw Base Pad Qty: One Qty: One Clamp screws Base plate Qty: Four Qty: One Grommet plate M8x65 screw Qty: One Qty: One Instruction manual...
-
Seite 17: Requirements
Qty: One Qty: One Requirements • Monitor that is compatible with one of the VESA mounting hole patterns that ARMSTSCP1 supports • Phillips type screwdriver • ¹/₄ inch drive ratchet Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/ARMSTSCP1. -
Seite 18: Assembly
• At least 0.3 inches (8 mm) of clearance between the table or desk and the wall • Monitor that weighs between 4.4 and 17.6 lb. (2 to 8 kg) Note: When you use the desk clamp to attach the ARMSTSCP1, the keyboard tray supports up to 3.3 lb. (1.5 kg) of weight. -
Seite 19: Assemble The Base Attachment
Assemble the base attachment Based on your setup, follow the steps to attach the grommet assembly or the desk clamp. Attach the grommet assembly 1. Line up the base plate with the assembly holes on the underside of the base. 2. - Seite 20 4. Remove the adhesive backing from the base pad and affix the base pad to the underside of the base. (figure 2) figure 2 Base Base pad Instruction manual...