GB
INSTRUCTION MANUAL
LED Worklight
FLS15000LMACEU - FLS15000LMACCH
IMPORTANT! RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY!
Technical specifi cations
Indoor/outdoor use
Protection class
Type of protection
Impact resistance
Operating temperature
Illuminant
Luminous fl ux
Color temperature
Supply cable
Dimensions
Weight
Power factor
Current
340 mm
Proper intended use
e LED light is suitable for indoor and outdoor lighting applications.
e LED light is wired ready for connection and comes with a
connecting cable and a safety plug. When use the light with EU plug
outdoor, make sure it will plug into an IPX4 socket.
plug shall be used indoors since these plugs are not waterproof.
e socket-outlet on the luminaire which are DE or FR version should
load the rated power less than 3500 W, the rated voltage does not
exceed to 250 V~, the rated current does not exceed to 16 A.
BS version do not exceed to 3150 W, 250 Vac, 13 A. And the CH
version do not exceed to 2300 W, 250 V~, 10 A. Another use than
the above or modifying the device is not permitted.
Maintenance
For non-user replaceable light sources
e light source contained in this luminaire shall only be replaced by
the manufacturer or his service agent or a similar qualifi ed person.
Never open the lamp when the mains supply cable is connected.
Caution, risk of electric shock (source: IEC60417-6042 (2011-11)).
Indoor and outdoor
I
IP54
IK08
-20 °C ~ +40 °C
140 W
15000 lm
5700 K
5 m H07RN-F 3G1.5 mm²
340 x 264 x 130 mm
2940 g
> 0.9
0.5 - 0.7 A
130 mm
e BS and Swiss
e
Cleaning
Do not use solvents, corrosive cleaners or the like. Use a dry or
slightly moist cloth for cleaning only.
Safety information
1. Prior to commissioning, make sure the right voltage is available.
2. Prior to each use, make sure the light and mains supply cable
are not damaged in any way. Never use the lamp if you fi nd
damage.
Caution!
A damaged light or mains supply cable
pose a risk to life due to electric shock!
3. Do not use the work lamp in explosive environments in which
fl ammable liquids, gases or dusts are present. Risk to life!
4. LED lights are extremely bright. Do not look directly at the lamp.
5. If the external fl exible cable or cord of this luminaire is damaged,
it shall be exclusively replaced by the manufacturer or his service
agent or a similar qualifi ed person in order to avoid a hazard.
6. Make sure the light is attached fi rmly and securely. Make sure
the cable is not crimped or otherwise damaged.
7. Keep children away from the lamp. Children cannot estimate the
risk of electric shock.
Disposal
Dispose of electric appliances in an
environmentally friendly manner!
Electric appliances must not be disposed of in
household waste!
e European Directive 2012/19/EU on
Waste Electrical and Electronic Equipment rules that used electric
appliances should be collected separately and recycled in an
environmentally friendly manner. For possibilities of disposal of the
used appliance, please contact your local or municipal administration.
BME Group Sourcing B.V.
Walaardt Sacréstraat 405
1117BM Schiphol
e Netherlands
www.bme-group.com