Key features
•
USB 3.1 (Gen 2) Type-C
•
RGB illuminated with changing, pulsating colours
•
USB 3.1 (Gen 2) data transfer rates of up to 10 Gbit/s
•
High-grade aluminium enclosure
•
Hot Plug and Plug & Play support
•
For Windows
Drive installation
1.
To open the enclosure, please use the delivered Sim tool. Push the Sim tool
with the pointed side ahead in the little hole on the bottom side of the
enclosure.
2.
Then push the inner frame out of the housing.
3.
Insert the 2.5" SSD/HDD gently into the SATA connector.
4.
Place the corresponding EVA inlay on the SSD/HDD.
4 mm EVA for 7 mm SSD/HDD
1.5 mm EVA for 9.5 mm SSD/HDD
Manual IB-G226L-C31
enclosure for 2.5" SATA SSD
®
and macOS
®
®
1.5 mm EVA 4 mm EVA