Werbung
Calibration
Calibration
should only be performed
calibration
requirements
back). Do not use coins or other
items
Prepare the required weight for your scale (see
chart on back).
2.
Find a flat and level surface to perform calibration
and let the scale adjust to room temperature.
3.
Press
scale to stabilise.
4.
Press and hold the MODE key until the display
shows
Make sure nothing is on the p atform then press
5.
MODE to confirm the zero point.
The display will then flash the required calibration
6.
weight.
Place the required calibration weight on the centre
of the platform.
8.
The display will show
'PASS' then
to normal weighing
mode. You may now
turn
the scale off or
continue weighing.
adjustment
weights that match the
for your scale (see the chart on
to calibrate.
ONIOFF
to turn
'CAL'.
return
is permanent
using accurate
the scale on and wait
and
household
for the
Werbung
