Werbung
Verfügbare Sprachen
Verfügbare Sprachen
UK
NL
DE
FR
Technical Data:
Type LED: 10 W COB LED
Brightness: 1100/550 Lumen
Battery: 3.7 V 4.4 Ah
IP rating: IP68
IK rating: IK09
Charging time: 4.5 hours
Run time: 3 ~ 6 hours
Working temperature: -20 ~ 50°C
Product dimensions: 150x101x42 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• Rechargeable work lamp with COB LED technology
• COB LEDs provide 1100/550 Lumen
• Long life COB LEDs (life span 100.000 hours)
• Internally mounted magnets (40 N)
• 180° swivel base
• M8 hole to support with tripod
• Low power consumption, low heat emission
• Battery level indicator for easy monitoring
• Lamp use is not affected by cold temperatures
• Cordless design improves safety, convenience and flexibility
• 3.7 V 4.4 Ah Li-Ion battery provides 3 ~ 6 hours constant light output
Instructions for use:
• Charge the battery for at least 8 hours before first use
• To charge the lamp: connect the cable via the micro USB to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V
adapter (optional) or any other USB power source available (Max. charging amp. 2 A) and then plug into a wall socket. Please
recharge in good time
• While charging the battery level indicator on the lamp displays a flashing white LED
• The battery level indicator on the lamp will show 4 white LEDs when charging is complete
• The work light is controlled by 1 button. Push the ON/OFF button (1x) for high setting (1100 Lumen), 2x for medium setting (550
Lumen) and 3x to turn the unit OFF
• Do not leave the battery in a fully discharged condition. Recharge the lamp at least once every 30 days. Always fully charge the
battery to extend the battery lifetime.
Accessories and spare parts:
USB-cable
100 ~ 240 V USB-charger optional (SIN-100.1070-2)
USB-car charger optional (SIN-100.0035-1)
Use only accessories and spare parts approved by the manufacturer
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
In use
100 - 75%
75 - 100%
4
3
Lumen Laser class I
Protection class III
EAN: 8717775519539
Colour temperature: 5700 K
Weight: 405 g
Hydrocarbon and UV resistant
Technical data optional charger (SIN-100.1070-2):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 1 A
50 - 25%
Low Power
0 - 25%
2
1
• IP68 rated
180°
• IK09 rated
• Robust, shock resistant ABS housing
During charging
25 - 50%
50 - 75%
1
2
3
40 N
75 - 100%
4
Werbung
