Herunterladen Diese Seite drucken
ACCESSORIES
EN
N
D-Ram Modul
EN
Read the safety instructions before starting the installation
DE
Lesen Sie die Sicherheitshinweise, bevor Sie mit der Installation beginnen.
FR
Lisez les instructions de sécurité avant de commencer l'installation.
1.
EN
DE
2x
4x
120 x 20 x 0,5mm Pad
ZUBEHÖR
4x
M3x8 screws
.
FRFR
DE FR
DE
Place the hardware on an antistatic surface. Now unscrew the
D-RAM modules and clean the inside of the D-RAM modules
from finger grease residues with a solvent (e.g. spirit) to ensure
optimum heat transfer.
DE
Legen Sie die Hardware auf eine antistatische Unterlage.
Schrauben Sie nun die D-RAM Module auf und
reinigen Sie als erstes zur optimalen Wärmeübertragung die
Innenseiten der D-RAM Module von Resten der Fingerfette mit
einem Lösemittel (z.B. Spiritus).
FR
Placez la quincaillerie sur une surface antistatique.
Dévissez maintenant les modules D-RAM et
Nettoyez d'abord l'intérieur des modules D-RAM des résidus de
graisse avec un solvant (par ex. de l'alcool) pour assurer un
transfert thermique optimal.
D-RAM Modul
ACCESSOIRES
FR
1x
hexagonal key
2,5 mm
loading

Inhaltszusammenfassung für Alphacool D-RAM

  • Seite 1 FRFR DE FR Place the hardware on an antistatic surface. Now unscrew the D-RAM modules and clean the inside of the D-RAM modules from finger grease residues with a solvent (e.g. spirit) to ensure optimum heat transfer. Legen Sie die Hardware auf eine antistatische Unterlage.
  • Seite 2 Place the 1st pad on the inside of the D-RAM module, now the RAM bar with the contacts down and the 2nd pad on the RAM bar. beidseitige Speicherbestückung Note: A thicker thermal pad (1mm) must be used for memory bars which have components only on one side.