GREENBLUE GB145 Bedienungsanleitung

-20 -
EN Wireless Home Weather Station
I. Features: When power is on, please do not operate it at the first three minutes
for its initialization phase.
1. 11 function keys: MODE, SET, UP ,C/F, DOWN, ZONE, V ,HIS, MEM, CH, Snooze/ Light.
2. Indoor temperature range: 0`C/50`C; Indoor humidity range: 20%-99%
3. Outdoor temperature range: -20`C/60`C; Outdoor humidity range: 20%-99%
4. Indoor/outdoor half round graph display shows the status temp/humidity measurement.
5. Indoor/outdoor trend indication of temperature/humidity.
6. Weather forecast: sunny, semi-sunny, cloudy, rainy, rainstorm.
7. Air pressure record of last 12 hours. 8. Max/min value record of indoor/outdoor
temperature and humidity. 9. Indoor comfort index: dry, comfort, wet 10. Outdoor
temperature with RF: up to 3 Channels. 11. Temperature display format selectable `C/`F.
12. Single alarm
II. Start-up and reset
1.When first start-up or reset, all of the icons and digits of the LCD will display for
3 seconds. It will then beep once and enter standard display mode. The clock will
automatically detect the temperature and humidity afterwards for 3 minutes.
Remark: Setting the air pressure: When batteries are first fitted or renewed the air
pressure is shown at sea level value. Input your current local Air pressure value (you
may be able to get this from your local weather TV channel, broadcast or geographic
Data ). The weather icon will change accordingly to forecast the weather for the next
six to twelve hours.
III. Button function:
1) MODE: Click "MODE" key to check alarm.
2) SET: a. Click "SET" key to check month, day, date and week.
b. Under time or alarm mode, hold "SET" key for 2 seconds to enter into time or alarm
setting mode, the sections being set will flash in the frequency of 1 Hz/second, press UP
or DOWN to choose the value needed, then press SET key to confirm the setting.
3) UP or C/F: a. Under setting mode, click "UP" key to adjust one step (forward).
b. Under standard mode, press "C/F" key to switch °C and °F.
4) DOWN, V or ZONE
a. Under setting mode, click "DOWN or V key to adjust one step (backward).
b. Under standard mode, press "ZONE" key to switch four time zone:
current—--zone+1—--zone+2—--zone-1
GB145
-01-