1More ESS3001T Bedienungsanleitung Seite 2

Power
Pawer On: Uncover the charging
Power Off: Put the headphones back into
case, the headphones will turn on
the charging case and close the lid, they will
automatically.
automatically turn off and start charging
• Above functions are available for either earbud in individual
Headphones Pairing
The headphones will automatically
pair to each other after the lid is
open when they are in the case.
Battery Notification
LED indicator for low battery:
when there is 25-30 minutes
Of use left, you will hear the
notification sound and the
LED indicator will flash red
Tap Controls
For optimal touch control performance, be Sure to tap the stem Of the bud to activate the
controls properly.
Phone Call
Answer/End call:
Double-tap
Voice control on cellphone:
Tap 3 times vet-en Bluetooth
on and no calls
• TO decline a call, please operate on paired mobile phone
• To change a song or control volume, please set up on 1MORE MUSIC APP or operate on
paired mobile phone or device
• Above functions are available for either earbud in individual
• Above functions may vary with different devices
I MORE (I) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be free from defective
materials and wo*manship for a period of one year from the date of purchase if it is properly
used and maintained. Ifthis product proves detective in either material or workmanship, 1MORE,
at its option, will (a)repair the product with new or refurbished parts, or (b) replace the product
with an equivalent new or refurbished product, at no charge for parts or labor Ifthe product
model is na longer available and cannot be repaired effectively or replaced with an identical
model, 1MORE at its sole option may replace the unit with a current model Ofequal or greater
value In some cases, modification to the rnounting sudace may be required where a new mode
is substituted. 1MORE assumes no responsibility or liability tor such modification. TO OBTAIN A
REPAIROR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE RETURN TO
THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER
WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT
NEW OR REFURBISHED PRODUCT You Will requited to submit a proof Ofpurchasing details,
including but not limited to a receipt or sales invoice
Return shipping for exchanges/repairs is the sole responsibility of the original retai purchaser.
Limitations:
• This limited warranty does not cover the failure of the product resulting from improper installation,
misuse, abuse, accident, neglect, mishand ing, or wear from ordinary' use or environmental
deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential
damage to other components or premises nhich may result for any reason from the failure of the
product
• This limited warranty is null and void for products not used in accordance with 1MOREk
instructions
• This limited warranty is null and void for products whh altered or missing serial numbers and tor
products not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party
FAQ
1 the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least SO minutes.
2 Vu'hythe headphones cannot connect to my cel phone, Or take a long time to connect?
1) If the earbuds cannot pair to one another, and only ona earbud will pair wth your cellphone, then
put both buds back into the charging case and quickly press the pairing button S times, click the
device name, they should now pair correctly to the phone
2) To pair the earbuds to a new cellphone, simply place them into the charging case and depress the
pairing button for 3 seconds Then click the new device name and pair with the naw cellphone
3. Why the headphones cannot play music after successfu ly connecting to my Android device?
Atter pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your
device name and make Sure the "Media Audio" option is on
4. Why there is no sound from the headphones while making phone calls after successfu B,' c onnecting
to my Android device?
After pairing successfully, the Bluetooth menu Ofyour device, tap the icon on the right Ofyour
device name and make sure the "Phone Audio• option is on
5 Why the Bluetooth connection is not stable and causes some interruptions?
1) Try shortening the distance between your headphones and device. Avoid solid barriers in between.
2) Please keep away from strong interference sources, such as Wi-Fi and GPRS
3) Please make sure the Bluetooth antenna ot your deuce is not blocked
6. Vv'hysome control functions do not match those in the manual while using third party musicA'ideo
player Apps?
Your operating system and the third party music,hhdeo player apps may have different settings for
control functions. We recommend that you use the music/video player apps that your device has
originally provided
7. turned the headphoens up to the maximum volume, but
In different operating systems, especially some Android systems, the headphones and your device
have separate volume control systems. Please adjust the volume controls on both the device and the
headphones according to your preference
8. Why are my headphones not able to connect to 1MORE MUSIC APP for the primary use?
For Android users, please click •Allow all the time• to access to the location information of your
device when entering 1MORE MUSIC APR Or adjust this option in your settings for this app
* For more detailed product FAQs, please Visit the product support section under www.lmore.com
Warning
ReplacementOfa battery with an incorrecttype that can defeat a safeguard(suchas catching
fire,explosion,leakageOfcorrosiveelectrolyteetc);
Disposal Of a battery into fire Or a hot oven, Or mechanically crushing Or cutting Of a battery, that
can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage Of flammable liquid or gas; and A battery subjected to extremely ow air
pressurethat may resultin an explosionor the leakageOfflammable liquidor gas
— The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment Nv'EEE)
This means that this product must be handled pursuant to European directive 2012/19/ElJ in order to
be recycled or dismantled to minimize its impact on the environment
User has the choice to give his product to a competent recycling organization or to the retailer when
he buys a new electrical or electronic equipment
To prevent possible hearing damage, do not listen at high volume levels for ong periods.
Supplier s Declaration of Conformty
47 CFR 5 2.1077 Compliance Information
Unique Identifier:
Trade Name: WORE
Model No.: ESS3001T
Responsible Party - IJ S. Contact Information
WORE LISA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California, 92121
Tel: 1-855-551-6673
E-Mai support@lmoreusa.com
Complies With
IMDA standards
103100760]
Name:l MORE ComfoBuds True Wireless Headphones
Model: ESS3001T Battery Life
Headphone Weight (Single): 3.8 g • Headphones fully charged
Case Weight: 2B 9 g Playback Time:
Product Weight: 36 5 g • Headphones and case fully charged
Headphone Size: 39.2 x 17.g x 18.7 mm Playback Time: 18 hours'
Bluetooth: Bluetooth@ 5.0
Case Size: 68.7 x 30 x 25 mm
mpedance: 30 n Bluetooth
Wireless Range: 10 m Input: 5V=O.5A
Headphone Battery Capacity (Single): 35 mAh Working Tennperature: O C - 45 C
Case Battery Capacity: 410 mAh Frequency Band: 2.400 GHz - 2.4835 GHz
Headphone Charging Time: 85 mins
Case Charging Time: BO mins
The specifications are acquired from laboratory tested data.
• The playback time. tested under the laboratory condition 01AAC format and 50% volume. may vary With
setting. environments. usage and Otherfactors
Manufacturer: Tiinlab Acoustic Technology Limited
Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan Str.,
Nanshan Dist., Shenzhen, P.R. China
Product information can be found at wwnvv 1more.com
Or Stereo mode.
When case battery is too low on charge,
LED indicator will flash red
cfi
Playback
Play/Pause:
Double-tap
or Stereo mode
SHALL REPAIR THE PRODUCT
WITH AN EQUIVALENT
the actual volume still sounds low?
hours'
Protocol: HFP / A2DP / AVRCP
device
In The Box
Headphones x 1 pair
Charging Case x 1
Placement
Bluetooth Pairing To The Device
To connect to your device during first use, turn the
headphones on to enter pairing mode. Headphones
will power off if not paired to a device within 3 minutes
2 After first successful pairing, headphones wi
automatically connect to your device
3 To pair with a new device: put headphones back into
the case, press and hold the pairing button for 3
seconds when powered on (no music or phone calls)
to re-enter pairing mode
' Above functions are available for either earbud in individual
Charging Methods
With the Type-C cable, a full charge With the charging case, a full charge will
will take around BO minutes And take around 85 minutes
the green light Of charging case headphones turning Off indicates
indicates full battery charging is complete
Smart Playback
TO stop playback intuitively when taking out your headphones,
putting them back in
To turn off Auto-Play connect the headphones to the IMORE MUSIC APP.
Extra Functions
If the headphones cannot pair normally when powered on, open the case and quickly click
the pairing button 3 times to reset the Left & Right pairing process
2 To unpair the cellphone:
Put both L & R into the case, and then press and hold the pairing button for 8 seconds.
OTA Firmware update: can be done synchronously with 1MORE MUSIC APP when Left and
3
Right headphones Bluetooth paired to each other
Functions of 1MORE MUSIC APP may vary with different cellphones or operating systems
For more details, please contact our customer service.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your
satisfaction Ifyou would like more details on this product or any of our other products, pleasa
visit us online by scanning the OR code. Go to wvm.lmore.com
will treat you like one
Tips
Please read this instruction manual carefu ly and retain for future reference
2 Please fully charge the battery before first use.
3. If the headphones have been unused for more than 3 months, we recommend that you charge
them. This will improve battery capacity
4 Only use charging cab es and adapters that are FCC (Federal Communications Commission)
approved
5 In dry' environments, static electricity may numb your ear This is not related to the quality Of the
product.
Safety Information
Never disassemble the headphones There are no user-serviceable parts inside
2 Do not expose the headphones to temperatures below 32 OF(O oc) or to temperatures above
113 'F (45 DC)
3 Do not use the headphones in a thunderstorm storm. This could prevent the headphones from
working properly, and also increase your chance ot being electrically shocked
4 Do not use oil or any volatile liquid to clean this product
5 Do not listen at high volumes for extended periods of time
6 Do not use the headphones in traffic. Do not use the headphones any time it would be
dangerous to be unaware of noises around you.
7 Adult supervision is required for children of age 6 and under
WEEE
Electrical and electronic equipment, parts and batteries marked with this symbol must not be
disposed of with normal household wastage, it must be collected and disposed ot separately
to protect the environment.
Your 1MORE retailer will advise you Ofthe correct way Of disposal in your country
Safety Caution
DOnot expose batteries Or battery' packs to excessive heat such as sunshine, fire Or the like
CE
Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares that the radio
equipment type 1MORE ComtoBuds True Wireless Headphones of ESS3001 T is in compliance
with Directive 2014/53/ELJ The full text Of the EIJ declaration Ofconformity is available at the
following internet 1more com
RF exposure information: The device has been evaluated to meet general RF exposure requirement
The device can be used in poäable exposure condition without restriction Radiation Exposure
Statement Power is so low that no RF exposure calculation is needed
Declaration for EIJ Compliance
Operation Frequency/Max. E-IRP:2402-2480MHz, Max. EIRP is 2.22dBm
FCC
The device has been evaluated to meet general RF exposure requirement, The device can be used in
portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation
Exposure Statement Power is so low that no RF exposure calculation is needed
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or changesto this equipment. Such modifications or changas could void the user's
authority to operate the equipment
NOTE: This equipment has bean tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful intefferenca to radio communications.
guarantee that interference will not occur in a particular installation.
harmful interference to radio or television reception, which can be determined by tuming the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the fol O'Mng measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-Consult the dealer or an experienced radio/Tv' technician for help
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s)
Operationis subjectto the folowing two conditions:
(1) this device may not cause interference, and (2)this device must accept any interference,
including interference that may cause undesired operation Of the device
Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s)
Son fonctionnement est sournis aux deux conditions suivantes:
(1) cet appareil ne Peut pas provoquer d'interférences, et (2) cet apparei doit accepter toute
interférence, y compris celles pouvant causer un mauvais fonctionnement de 'apparei
ThisClass a digitalapparatuscomplieswith CanadianICES-003
Cet appareil numérique de la classe B est conforme
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual _The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is available
Déclaration d' exposition aux radiations:
Le produit est conforme aux limites d' exposition pour les appareils portables RF pour les Etats-lJnis
et le Canada établies pour un environnement non contrölé
Le produit est Sür pour un fonctionnement tel que décrit dans ce manuel La réduction aux
expositions RFPeutétre augmentéesi l'appareilPeutétre conservéaussi loin que possibledu
corps de 'utilisateurou que le dispositifest régléSur la puissancede sortiela plus faible si une
telle fonction est disponible
Type-C Charging Cabe x 1
O
or Stereo mode.
Red light Of
and to resumes playback when
and sign up for VIP, and 1MORE
However, there is no
this equipment does cause
la norme NME3-003 du Canada