Watchguard Firebox Peak X5000 Schnellstart Seite 2

Getting Started
Firebox®X Peak™ has the security you really need. A fully integrated appliance, it contains
powerful layered network security, intuitive management and premium support through
LiveSecurity®Service. This QuickStart Guide covers the initial installation of Firebox X Peak. Refer
to your Hardware Guide and WatchGuard® System Manager User Guide for hardware specifications
and comprehensive setup instructions.
Navigation Buttons
Package Contents
✔
Firebox X Peak appliance
✔
QuickStart Guide
✔
User documentation
✔
Three straight-thru Ethernet cables (green)
✔
One Cross-over Ethernet cable (red)
✔
One Serial cable (blue)
✔
Rack-mounting kit
✔
WatchGuard System Manager CD-ROM
✔
License key certificate
✔
LiveSecurity Service activation card
✔
Warranty card
1
Registering with LiveSecurity
You must activate this product and get a Feature Key to enable the device.
1. Log on to http://www.watchguard.com/activate
2. Follow the onscreen instructions.
3. Download the Feature Key for the product you are registering.
LiveSecurity Service
Username
Password
All manuals and user guides at all-guides.com
Console
LCD Display
Power Light Netw ork Activity Lights
Trusted Interface
Steps for Installation
Registering with LiveSecurity ® Service
■
Gathering network information
■
Setting up the management station
■
Cabling the Firebox X Peak
■
Using the Quick Setup Wizard
■
Deploying the Firebox X Peak into your network
■
Service
®
Firebox X Peak Serial Number
Found on the back of your Firebox under the barcode.
2
Network Interfaces