Thermrup HS626 Gebrauchsanweisung Seite 7

1 x Instruction Manual
3. Product features
The Thermrup Mobiles heated seat cushion can be used for indoor and outdoor, it
offers deep warmth with far infrared. It has 3 adjustable temperature levels. The
special rubber heating element has a large heating surface and even heat
distribution. The seat cushion is machine washable.
Operation
4.
4.1 Operating with power bank
 Plug the USB end of the cable into the USB port of the power bank(not
included). Turn on the power bank.
 Puts the power bank in the battery bag.
Press the Controller for approx. 2 seconds to switch on the heating function. Then
press the Controller button briefly again (several times if necessary) to set the
desired temperature level (level 1-2-3, red -green -blue).
The 1st level is the warmest level. (LED display lights up red)
The 2nd level is the middle level. (LED display lights up green)
The 3rd level is the lower level. (LED display lights up blue)
 After 30 seconds, the power button will go into power-saving mode and
the LED indicator will darken, but the heating function will continue, briefly
press the power button again to unlock it from power-saving mode. You
can then set your desired level as described above.
 Press the on / off switch for approx. 2 seconds to switch off the heating
function.
4.2 Mains operation
 Connect the extension cable to the connection cable of
the seat cushion.
USB Cable
Battery Bag
Controller
7