Herunterladen Diese Seite drucken

Malmbergs MD-70 Gebrauchsanweisung Seite 4

Werbung

Driver
height
Ceiling
thickness
DE
Hinweis: Die Lichtquelle kann nicht
ausgewechselt werden. Wenn die
LED-Diode(n) defekt ist/sind, muss die
gesamte Armatur ausgewechselt werden.
FI
HUOM! Valonlähde ei ole vaihdettavissa.
Jos LED on vioittunut, täytyy uusia koko
valaisin.
NL
Let op! Lichtbron kan niet vervangen
worden. Mocht de LED lichtbron kapot
gaan, dan dient het hele armatuur
vervangen te worden.
EMC Standard (EMC)
EMC Directive 2014/30/EU, EN 55015:2013+A1:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009
Safety Standard (LVD)
LVD Directive 2014/35/EC, EN 60598-2-2:2012, EN 60598-1:2015, EN 62031:2008+A1:2013, EN 62471:2008
RoHS Standard (RoHS)
RoHS Directive (EU) 2015/863, IEC 62321-1:2013
Declaration of Conformity
We hereby certify that the device satisfies the provisions for CE/Intertek markings in accordance with the EU directives
(LVD Directive 2014/35/EC, EMC Directive 2014/30/EU, RoHS Directive (EU) 2015/863) as described in this manual.
For and on behalf of:
Min. 50 mm
DK
OBS! Lyskilden kan ikke udskiftes. Hvis
LED-lysdioderne stopper med at fungere,
skal hele armaturet udskiftes.
FR
Remarque. La source lumineuse ne peut
pas être remplacée. En cas de défaillance
de la (les) diode(s) DEL, l'ensemble du
luminaire doit être changé.
NO
OBS! Lyskilden kan ikke byttes. Om
LED-dioden/diodene blir ødelagt må hele
armaturen byttes.
Cutout size: Ø 80 mm
Min. 300 mm
Malmbergs Elektriska AB, Sweden.
Mr. Anders Folke / Product Manager
Date: December 25, 2019
Min. 300 mm
EN
NOTE! The light source cannot be
replaced. If the LED diode(s) fails, the
whole luminaire must be replaced.
I
NOTA. La sorgente luminosa non può
essere sostituita. Se il diodo/diodi LED non
funziona/funzionano, deve essere
sostituita l'intera lampada.
SE
OBS! Ljuskällan går ej att byta. Om
LED-dioden/dioderna går sönder måste
hela armaturen bytas.
Built
in size

Werbung

loading

Diese Anleitung auch für:

99 746 60