TRENDnet TEW-659BRV Anleitung Zur Schnellinstallation Seite 6

Note:
1. Toprotect your networkfrom any unauthorizedaccess it is recommendedto
enable wireless encryption.
2. The example below is for WPA-PSK/WPA2-PSK (AES) security.If you select
WPA-PSKor WPA2-PSK,make sure your wireless adapterssupport WPAor
WPA2. If your wireless adaptersdo not support WPAor WPA2,then select
WE-P.
3. WEP encryptiononly supports 802.11b/g speed of up to 54Mbps.
4. Once encryptionis enabledon the router,each wireless computerand device
must be configuredwith the same encryptionkey.
10. Select the desired Authentication
mode, select the desired
Encryptiontype, enter characters
for your Presharekey and then
click Next. For WPA-PSK or
WPA2-PSK,the Presharekey
must be between 8 and 63 ASCII
or 64 HEX characters.
to copy down the Presharekey.
Youwill needthe Presharekey
when you configureyour wireless
adapter(s).
11. Click Apply Settings.
12. Please wait while the
Make sure
13. Click Finish.
TEW-659BRV reboots
the changes.
C:rn
and saves