Werbung
Verfügbare Sprachen
Verfügbare Sprachen
www.VentureHome.se | www.VentureDesign.se
Congratulations on your new furniture from Venture Home,
We hope you will be happy with your new furniture,
In order to get the most of this products there are some tips on how to care for the
different materials in the best way.
Furniture With MDF-top (painted, laminated, veneer or paper covered)
Be careful with sharp objects as they may scratch the surface and edges. Clean the surface
with damp cloth . Excessive fluids may cause bubbles in the surface.
Some of our furniture are hand painted, hence differences in coloration / small scratches
over the surface is not a claim.
Fabrics / PU / Velvet
Wipe with damp cloth on spots. Especially Velvet and PU-fabrics are sensitive for sharp
objects.
Metal
Handle with care in order to not cause distress to the surface. Clean with dust cloth.
Carpets
On the backside of your carpet you can find specific instruction for your rug.
Untreated Wood
Use damp cloth to remove stains. For protection of the surface a clear teak wax can be used.
Note that this will give the table a shiny finish. Clean up any spill immediately.
Marble:
is sensitive to acidic liquids, which makes most standard cleaning detergents not applicable
to marble. In order to protect your marble surface – use soft soap or protective varnish
especially made for marble. These varnishes can usually be found at your local hardware
store or furniture shop.
For more care advise, see www.venturehome.se
Note!
Be careful when assembling, if screws are tightened too hard (or by screwdriver), damages
in the tabletop may appear. If these damages appear in assembly, we do not concider this a
claim!
Tighten all screws 20% before cross-tighten all screws until all srews are fully tightened.
Screws might need to be tightened after some time of using the product.
@Venturehomese
@Venture.Design
Werbung
