Braun BC10 Kurzanleitung

BC10
Alarm clock
Quick set-up guide
For detailed information refer to
the full user manual available at
www.braun-clocks.com/pages/warranty
or scan this code:
Braun helpline
Should you have a problem with your
product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the
Procter & Gamble Company or its affiliates.
3
2
6
4
5
1
Battery installation
1. Remove the battery door.
2. Insert 2x AA size new batteries as indicated
in the battery compartment ( ) and press the
2
RESET key ( ) to reset the clock. The display
3
will turn on after a few seconds.
3. Close the battery door.
Only use new alkaline batteries from a
reputable brand.
Setting the time
1. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch ( ) to the TIME SETTING position.
1
2. Press the '+' or '-' key ( ) to set the desired value.
5
3. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch to the NEUTRAL position to return
the normal display and save the settings.
Setting the alarm
1. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch ( ) to the ALARM SETTING position.
1
2. Press the '+' or '-' key ( ) to set the desired value.
5
3. Slide the TIME SETTING / NEUTRAL / ALARM
SETTING switch to the NEUTRAL position to return
the normal display and save the settings.
Using the alarm function
1. Enable the alarm by pushing the ALARM ON / OFF
slider ( ) up (so the green indicator is visible).
4
2. To disable the alarm and snooze function, push the
ALARM ON / OFF slider down.
Using the snooze function
Tap the SNOOZE touch button ( ) to stop the alarm
6
and activate the snooze function. When the snooze
function is activated, the alarm will automatically
start again after 5 minutes. The snooze function will
not stop unless the ALARM ON / OFF SLIDER is
pushed down