Signal to noise ratio
Drawing of the device
Figure 1
1. Induction charging slot
2. Outer face of the light ring
3. Light ring
4. Function buttons
5. Speaker
6. Touch switch for lighting
Use of the device
This product has a wireless charger with simple design and compatible with any mobile phones with QI
standard. Mobile phone is without plug when charging.
INDUCTION CHARGE
1. Plug the USB port of the USB data cable to the power adapter and the Type C end to the wireless
charger.
2. Place the device that needs to be charged in the charging indication area of the product.
3. Unplug the wireless charger after use.
Note: This product supports fast wireless charging function, meets the QI wireless standard charging
standard, and realizes short-range wireless energy transmission by magnetic induction. This device
supports all QI standard wireless charging devices. When a 5V output adapter is used, the wireless
charger supports 5W load, suitable for QC2.0 and above adapters, wireless charging gas supports 15W
load, with overcharge protection (9V) and overcurrent protection (2A).
USE OF THE LIGHT
.
1
Touch the first time to start the light 30% brightness
2. Touch the second time to change the light 70% brightness
3. Touch the third time to change the light 100% brightness
4. Touch the fourth time to turn off the light
BLUETOOTH COMPATIBLE SPEAKER
When the unit is turned off, short press the ON/OFF button, A beep will sound. The speaker is trying to pair.
Activate the Bluetooth function of your mobile phone. Select the name of the TES259 device, the pairing
is done automatically. Short press the bouton
ON/0FF to deactivate Bluetooth.
BUTTON FUNCTIONS
ON/OFF – PREVIOUS SONG-PLAY/ PAUSE -NEXT SONG-VOULUME DOWN-VOULME UP-BLLUETOOTH
PAIRING/CANCELING
During playback, short press the play/pause button
VOLUME UP
85 dB
to cancel or connect Bluetooth pairing. short press
www.livoo.fr
Size
Weight
Figure 2
7.
Port type C
to pause the song. Press again to play.
Ø18x 52mm
545 g
EN