Omnitronic MO-4 Kurzanleitung Seite 2

MO-4 Monitor Stand
For your own safety, please read this leaflet
carefully before you initially start-up. You can find
the latest update online.
Applications
This stand is designed for installing a speaker
system. The stand can be adjusted in height and
is particulary suited for 5.1 systems or nearfield
monitors. Cables can be fed through the tube.
Delivery includes mounting adapters for various
speaker types. This product is designed for
professional use, e.g. on stages, in discotheques,
theaters etc.
Safety Instructions
1 Unpack the stand. Before you initially start-up,
please make sure that there is no damage
caused by transportation. Should there be any,
consult your dealer and do not use the device.
2 This device has left our premises in absolutely
perfect condition. In order to maintain this
condition and to ensure a safe operation, it is
absolutely necessary for the user to follow the
safety instructions and warning notes written in
this user manual. Damages caused by the
disregard of this user manual are not subject to
warranty. The dealer will not accept liability for
any resulting defects or problems.
3 If the product will be operated in any way
different to the one described in this manual, it
may suffer damages and the guarantee
becomes void. Please consider that
unauthorized modifications on the adapter are
forbidden due to safety reasons.
4 Do not exceed the carrying capacity of the
stand.
5 Do not exceed the maximum extension height.
6 The loads have to be installed in a balanced
way.
7 Stands may cause severe injuries when
crashing! Only install on a plane area with a
maximum inclination angle of 5°.
8 When using stands under the influence of
horizontal forces, e.g. through wind, the
standing safety can be impaired. This is why
additional safety measures like attaching
ballast weights have to be taken. If inclined
tension cables or prolonged outriggers are
used, the area of danger has to be marked or
even be blocked.
9 Before lifting or lowering the telescopic tube,
always block a safety area around the stand.
This safety area must have a diameter of 1.5
times the maximum height.
10 Before taking into operation, check upon
possible damages. If defective, the stand must
not be taken into operation.
Technical Specifications
Max. load:
Mounting area:
Min. height:
Max. height:
Base area:
Weight:
Every information is subject to change without prior
notice. 06.08.2015 ©
00093180.DOCX, Version 1.0
Item 60004204
20 kg
152 x 100 mm
415 mm
1150 mm
Ø 390 mm
4 kg