Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Press "3" and then press "
3.Press "
"to exit the system.
6.2.5 Vacation mode
1. Press the number key to wake up the system and press "
enter the administrator's keypad password and press "
2. Press " 4 ", the vacation mode activated successfully.
6.2.6 Factory reset
1. Press the number key to wake up the system and press "
enter the administrator's keypad password and press "
2. According to the voice prompt, press "5" and then press " " to restore the factory
settings successfully.
3. Press " " to exit the system.
7 Troubleshooting
1.The fingerprint can not be logged:
A.If the fingerprint is damaged or unclear, you can change another finger with clear
fingerprint.
B.Fingerprint verification failed:
A.If the user's fingerprint is not registered, it can not be verified.
B.Please confirm that the fingerprints are properly placed in the sensing area.
3.The smartlock is not work:
A.Check if the battery is exhausted.
4.The lock cylinder was successfully unlocked, but the door did not open.
A.This product is a lock cylinder, after unlocking, you need to turn the handle to open
the door.
5. Can it be used outdoors?
A. Not waterproof, water will seep in, causing a short circuit on the circuit board,
please use it indoors.
8 Daily maintenance
1.Please use the high quality 7th AAA alkaline battery, and replace the new battery
when the voice prompts low voltage or the indicator is red.
2.Please do not touch the corrosive material on the surface of the panel and the lock
body. It will destroy the electroplating layer, affect the surface gloss.
3.The door handle is the important part of the lock. Please do not hang anything on
the door handle.
". Delete all normal users' fingerprint and Password.
13
", then press "
" key to confirm.
", then press "
" key to confirm.
",
",
Werbung
