Strand Lighting QUARTET Betriebsanleitung

QUARTET RANGE OPERATING INSTRUCTIONS
GENERAL
Your Quartet spotlight has been designed to conform to the most recent safety
standards. The rating label information on the side of the equipment provides the
following information:
On your luminaire this symbol will have a number on
it. This is the batch number and should be quotedif
you haveto contact a Strand dealer with any query on
the product.
These figures provide data relating to the minimum
distance from the luminaire to a flammable surface.
The top of the label relates to a surface in the light
beam and the bottom of the label relates to the
surface nearest the luminaire.
This symbol gives the angle oftilt that the luminaire
can be adjusted through, i.e. the first is degrees up,
the last is degrees down.
This symbol gives the maximum ambient operating
temperature of the environment in which the
luminaire can be operated.
45°C ta
This symbol specifies the type of lamp base suitable
for usein this luminaire.
GY9.5
This symbol gives the maximum surface temperature
on the body of the luminaire.
210°C
MAINS CONNECTION
The luminaire is fitted with 1.5 m of 0.75 mm squared, 3 core, silicon sheathed
flexible cable rated at a maximum operating temperature of 180 °C. This should
befitted with a suitable connector to allow the luminaire to be easily disconnected
from the mains supply for lamp replacement.
Strand
LIGHTING
G
WARNING
Before lamping or relamping always disconnect the luminaire from both poles of
the power supply.
The quartz envelope of tungsten-halogen lampsattains a very high temperature.
Allow luminaire to cool for at least 5 minutes before attempting lamp removal.
Follow the lamp manufacturers instructions for handling quartz envelope lamps.
In particular, do not handle the quartz enveiope— usethe plastic sheath provided.
For access to the lampholder, turn the securing screw (1) and pull the lamptray
casting (2) down.
To fit a new lamp, align the unequal diameter pins of the lamp with the appropriate
unequal diameter socketsin the lampholder, insert the lamp and push firmly down
until the ceramic base of the lamp seats on the flat top of the lampholder. Close
the lamptray and turn the securing screwto lockit in the closed position.
LAMP FITTING
A T26, 650 Watt lamp is supplied with the 240/220 V Quartet luminaire. The
following lamp types can also be used:
TYPE WATTS COLOUR AVERAGE
TEMP LIFE
(K) (HRS)
T18 500 3050 500
T 26 650 3050 400
cP 81 300 3200 150
CP 82 500 3200 150
M 38 300 - 2000
M40 500 - 2000
TYPE WATTS COLOUR AVERAGE Volts
TEMP (K) LIFE (HRS) (V)
126 (FRE) 650 3050 400 120
CP89 (FRK) 650 3200 200 120
CP82 (FRB) 500 3200 200 120
CP81 (FKW) 300 3200 200 120
T18 300 3050 400 120
FMR 600 3000 2000 120
vod