Werbung
Verfügbare Sprachen
Verfügbare Sprachen
❹ Instructions
Installation
❶
Pour clean drinking water into the water
storage bucket and make sure it does not exceed
the MAX level.
❷
Install the filter tray, filter, and drinking water
tray on the water storage bucket. (Attention: The
filter needs be installed in the correct direction.)
❸
Put the main body through the side socket
of the drinking water bucket. Install it
downwards and clamp it tightly.
Power On/Off
Hold the On/Off button for 3 seconds to turn on the
device.
Working Mode
When the device is turned on, it will automatically
dispense water every 60 minutes. Additionally, the
fountain will dispense water automatically when the
sensor detects the pet. Please add water when the
water level falls below the minimum (Min) level.
Infrared Sensor Working Range
The device is equipped with a wide-angle infrared
sensor that detects pet presence within 2 meter range
and the device will work automatically.
m
Werbung
