Technical Specifications; Crossover Network - E-Mu Ps12 Bedienungsanleitung

Technical Specifications

General
Type
Frequency Response
Maximum Sound Pressure Level, short term
Driver
Dimensions
Weight
Power
Fuse
Connections
Inputs
Satellite Outputs
Subwoofer/High-Pass Bypass Foot Switch *

Crossover Network

Sub-Sonic Rumble Filter
Low-Pass Filter (to subwoofer)
High-Pass Filter (to satellite outputs)
Input impedance
Amplifier
Type
Power
Signal-to-Noise Ratio, referred to full output
Distortion
* Foot Switch not included
10
Front firing, acoustic suspension active reference subwoofer
22Hz ~ 135Hz (±2.5dB), 30Hz - 100Hz (± 1.5dB)
≥103dB SPL @1m @ 60Hz
Polymer-Laminated Cone with Butyl-rubber surround
12" Diameter Long-Throw woofer with 50mm high temperature voice coil
Size: 305mm (12")
Height: 385mm (15.1")
Width: 362mm (14.2")
Depth: 390mm (15.3")
19.5kg (43lbs)
Input Voltage: 100 - 120V~50/60Hz Input Current: 2.5A
Input Voltage: 220 - 240V~50/60Hz Input Current: 1.25A
100-120V: 2.5A/250V
220-240V: 1.25A/250V
(2) Balanced Neutrik® Combination XLR -
(2) Unbalanced RCA
(2) Balanced XLR
(2) Unbalanced RCA
¼" Foot Switch input
15Hz @ 12dB/Octave
Variable frequency Linkwitz-Riley 4th order (55Hz ~ 135Hz)
Variable frequency Linkwitz-Riley 2nd order (40Hz ~ 135Hz)
Balanced: 20K ohms
Unbalanced: 100K ohms
Custom discrete MOSFET
200W RMS into 4 ohms Continuous
> 102dB A-weighted
THD < 0.1%
¼"