FrSky TFR8 Handbuch

Instruction Manual for TF Receivers
1. TF Receivers
Please note that there are many differences between some brand and FrSky, especially
in binding procedure and failsafe setting. Read the instruction manual carefully and set
up devices as described below.
1.1 Compatibility:
FASST 2.4G System (TM7, TM8, TM10, TM14, etc.)
FrSky TF Module (TF-8M, TF-14M)
1.2 Specifications:
Number of Channels: 8
Operating Voltage Range: 3.5V~10V
Dimension: 53mm*30mm*11mm
Weight: 13.5g
Latency: 14ms (FS)
7ms (HS)
2. Setup
2.1 Bind procedure:
Turn on the transmitter, connect the battery to the receiver while pressing receiver's F/S button.
After the RED LED is off and GREEN LED is solid, the binding process is completed and
working mode is activated.
2.2 Setting failsafe:
TF series receivers support failsafe function for all channels. Please kindly follow the steps
below to set failsafe:
1) Bind the receiver first, and disable failsafe on the transmitter side;
2) Set failsafe at any required position on any channel;
3) Press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash
twice, indicating the failsafe is set up successfully.
www.frsky-rc.com