Werbung
Verfügbare Sprachen
Verfügbare Sprachen
weather station is started is 3 minutes. If all the channels are received, the
radio control time receiving mode will be automatically entered, and the
backlight will be extinguished automatically.
2.2 Notes for Customer before Use
The CR2032 battery is the backup power source for the weather station.
When the power supply of the power adapter is not connected to the
weather station, the weather station's display will automatically not be
displayed.
When product enter the radio control time receiving mode, the backlight will
automatically turn off. This is a normal phenomenon. After the radio control
time receiving reception, the backlight will be automatically lit. Press and hold
"
" button 3 seconds it can cancel the DCF signal search and all buttons
and backlight will function.
3 TIME, TIME ZONE AND CALENDAR SETTING
3.1 Manual Time Setting
Press and hold down the " SET/ " button more than 3 seconds, the RCC
icon display starts to flash. Use the "
control time receive function to ON or OFF.
Press " SET/ " to confirm your setting, the Time zones start to flash, Use
"
" and "
Press " SET/ " to confirm your setting, the 24Hr display starts to flash. Use
the "
" and "
mode.
Press " SET/ " to confirm your setting, the Hour display starts to flash. Use
"
" and "
FJ3391-DCF Manual
" buttons to set the correct time zone (-1,0,1 and 2).
" buttons to set the time format to 24Hr mode or 12Hr
" buttons to set the correct hour.
" and "
20
" buttons to set the radio
Werbung
