ProMedix PR-530 Kurzanleitung

EN I Touchless Liquid
Soap Dispenser
PR-530
Use Attention
In the process of manufacturing and inspection, it is possible to leave moisture in the
inner wall tube.
The product is not completely waterproof.
Avoid using in the water, avoid spray of water and place in high humidity for a long
time.
During use, please do not tilt or reverse the device, the liquid inside may leak.
If transferring to use other liquids, please wash and dry the tank thoroughly.
Do not place liquid in the product if not in use for a long time.
If not used for a long time, the liquid may drip out of the nozzle or freeze the internal
liquid.Replace the hand sanitizer in the bottle with warm water. Continuous use until no
foam. Or use the automatic cleaning function,it may help you solve this problem.
Please clean the nozzle regularly.
.
About Liquids Used
The device is for liquid soap, hand sanitizer and detergent liquid.
Do not use liquid cleansing oil, disinfectant alcohol, high viscosity liquid, shampoo,
bubble hand soap, diluted hand sanitizer, etc.
liquid outlet
FAQ
The device is not working properly
●Check if the battery has enough power.
●Is the battery positive and negative poles are in the right direction.
●Whether the red sensor area is shielded by foreign objects.
No liquid
●Whether the liquid near the nozzle is solidified.Wipe the solidified liquid gently with a warm
water towel.
●If not using for a long time, there may be no liquid discharge. Replace the hand sanitizer in
the bottle with warm water and sense several times.
●Clean the solidified silicone tube to ensure the liquid flow smoothly.
●Is there any liquid left in the bottle.
●Whether the liquid is too thick.