Anker A83H1 Benutzerhandbuch

EN: Anker HDMI Switch (2 in 1 Out, 4K HDMI) User Guide (A83H1)
At a Glance
3
Switch Button
1
HDMI Output Port
2
HDMI Input Port 1
3
HDMI Input Port 2
4
Using Your Product
Use as HDMI Switch (2-in-1-out Mode)
Connect 2 HDMI sources to 1 HDMI display.
Press the switch button on the top to choose HDMI source you need to watch.
Input
STB
PC
Use as HDMI Splitter (1-in-2-out Mode)
Connect 1 HDMI source to toggle between 2 monitors.
Press the switch button on to choose which monitor you want to watch.
Output
Monitor×2
⚠
Two monitors cannot be used simultaneously in this 1-in-2-out mode.
Note: The quality of the projection is influenced by the length and type of HDMI cable used. Please refer to the following table to select the most suitable HDMI cable for your needs.
Resolution HDMI Cable Length (for Input Port) HDMI Cable Length (for Output Port) HDMI Cable Length (Total)
4K@60Hz ≤1m
4K@30Hz ≤1m
1080P@60Hz
≤1m
Specifications
Input
Output
Resolution
Function Supported
Audio Formats Supported
Audio Sampling Rate Supported
Data Transfer Speed
Bidirectional Switch
Supported Systems
2
1
4
Press to switch input sources
4K@60 Hz
4K@60 Hz
4K@60 Hz
≤1m
≤15m
≤20m
HDMI Ports x2
HDMI Port x1
4K@60Hz, backward compatible with 1080P/1080i, 720P/720i,
576P/576i, 480P/480i
3D Contents, CEC, HDCP2.2
DTS, DSD, Dolby AC3, 5,1 and 7.1 Channel
Up to 192 KHz, 24 bit
Up to 18Gbps
Supported
macOS 12 or later, Windows 10 or later
Output
Monitor
Input
PC
≤2m
≤16m
≤21m
AWG (American Wire Gauge)
30AWG
26AWG
24AWG