Herunterladen Diese Seite drucken

Nova VWK1 Aufstell- Und Bedienungsanleitung

Wandhalterung

Werbung

CRAAFT AUDIO GmbH
Gewerbering 42 | 94060 Pocking / Germany | Phone: +49 (0) 85 31 / 31 71 - 0 | Fax: +49 (0) 85 31 / 31 71 - 25
Email: info@nv-nova.vom | www.nv-nova.com
Wandhalterung / wall mount VWK1
Artikelnummer / article number #80041
Aufstell- und Bedienungsanleitung / instruction manual
1. Schwenkbügel von Halterung trennen
1.
Separate swivel joint from wall bracket
1.b
Schwenkbügel/Adapterplatte
aus Wandhalter entnehmen
Gather swivel joint from
wall bracket
1.a
Untere
Schraubverbindung
auseinander schrauben
Loosen lower bolted assembly
2. Wandplatte montieren/ wall bracket fastening
2.a
Halteplatte
senkrecht ausrichten,
Bohrlöcher markieren
Adjust wall plate vertically
Betonwand - Bsp.: Bolzen-Anker M6x65
concrete wall - e.g.: steel-anchor-bolt M6x65
-aufbohren, Loch ausblasen, Anker einschlagen, Halterung
-anbringen, U-Scheiben setzen, Muttern anziehen
-drill and blow out hole, place anchor, wall bracket and
-washer, tighten hex nut
2.b Dübellöcher bohren (4x)
2.b
Anchor holes drilling (4x)
Durchmesser / diameter
-6 mm bei Bolzen-Anker
-6 mm steel-anchor-bolt
-8 mm bei Rahmendübel
-8 mm universal frame fixing set
ohne Siebhülse für Vollmauerwerk und Beton - mit Siebhülse für Hohlkammersteine / wahlweise mit Anker-Gewindestange M6 oder Innengewindehülse M6.
without sieve bushing for concrete wall - with sieve bushing for perforated bricks / optional with threaded bolt M6 or threadedbushing M6.
Vorteile: Befestigung arbeitet spreizdruckfrei, dadurch kann die Halterung beliebig oft ausgewechselt werden und erlaubt eine randnahe Montage (nicht unter
Vorteile:100 mm Abstand). Genaue Montagehinweise entnehmen Sie bitte den Beipackinformationen
Vorteile:der Produkte.
Advantages: fixing without pressure, enables repeated mounting, capable for diverse wall materials
Advantages:
Für NOVA VS8 und VS10, mit Universal-Adapterplatte, einstellbar in Ausrichtung und Neigung
For NOVA VS8 and VS10, easy handling, adjustable direction and angle
MADE IN GERMANY
3. Befestigungsbeispiele / wall mount options
Lochsteine - Bsp.: Rahmendübel 8x80 mit Holzschraube 6x85
perforated bricks -e.g.: universal frame fixing set 8x80
-Löcher bohren, senken und ausblasen, Dübel setzen, Halterung
-anbringen, Schrauben eindrehen
-drill, countersink and blow out hole, place anchor and bracket, fix
-hexagon head wood screw
C
Einspritzmörtel-Verankerungen / injection-molded-anchor
(please notice instructions of anchor manufacturers).

Werbung

loading

Inhaltszusammenfassung für Nova VWK1

  • Seite 1 Gewerbering 42 | 94060 Pocking / Germany | Phone: +49 (0) 85 31 / 31 71 - 0 | Fax: +49 (0) 85 31 / 31 71 - 25 Email: info@nv-nova.vom | www.nv-nova.com Wandhalterung / wall mount VWK1 Für NOVA VS8 und VS10, mit Universal-Adapterplatte, einstellbar in Ausrichtung und Neigung For NOVA VS8 and VS10, easy handling, adjustable direction and angle Artikelnummer / article number #80041...
  • Seite 2 Gewerbering 42 | 94060 Pocking / Germany | Phone: +49 (0) 85 31 / 31 71 - 0 | Fax: +49 (0) 85 31 / 31 71 - 25 Email: info@nv-nova.vom | www.nv-nova.com Wandhalterung / wall mount VWK1 Für NOVA VS8 und VS10, mit Universal-Adapterplatte, einstellbar in Ausrichtung und Neigung For NOVA VS8 and VS10, easy handling, adjustable direction and angle Artikelnummer / article number #80041...