NINCOAIR Alutwin G 340 RTF Handbuch Seite 7

TRANSMITTER
On / Off indicator LED
Up / down
INSTALLATION AND BATTERY CHARGE
Transmitter:
Switch in position OFF
1. Open the battery cover.
2. Fit the batteries (respect polarity).
3. Close battery cover.
Helicopter:
Switch in position OFF.
When the process finishes the LED will turn on. (Charging time approx. 60 min).
HELICOPTER FLIGHT
1. With the helicopter switched off, first switch on the transmitter.
2. Switch on the helicopter.
3. Place the helicopter in the floor.
4. Ready to fly.
Trim adjustments:
1. Push again the left stick SLOWLY to start the flight (approx. between 0,5m and 1m).
2. If the tail turns left or right, please trim it using the trim button on the transmitter. Turn it clockwise o vice versa until the helicopter stops turning.
NINCOAIR is brand of NINCO DESARROLLOS S.L.
Ctra. de l'Hospitalet 32
08940 Cornella Barcelona Spain
CIF B-60307725 · www.nincoair.com
7
Turn right / left
Forward / backward
Switch Off/On
Trim
Dual rate (normal-turbo)