TFA 60.2538 Bedienungsanleitung Seite 11

TFA_No. 60.2538_Anleitung 23.05.2017
BOOM – High performance radio-controlled alarm clock with vibration alarm
8.2 Backlight overview
When bright
Position No
backlight
Position Day
backlight
Position No
backlight
Pure No
battery operation backlight
• Note: During a DCF signal reception, the lighting is temporarily disabled or cannot be activated.
8.3 Backlight adjustment
8.3.1 Day backlight and flashing light when waking
• The day backlight and the light signal brightness can be both adjusted in 5 steps (see 9.3.3
alarm functions / brightness setting).
8.3.2 Automatic night backlight
• You can adjust the brightness level of the automatic night backlight in the setting mode for
either HIGH or LOW (see 7.1.5 Manual settings/Auto Light setting).
9. Alarm
9.1 Alarm time setting
• The alarm clock has two alarms with different alarm times and tones.
9.1.1 Setting of the first alarm time
• Press the SET 1 button in normal mode.
• 7:00 (default) or the last adjusted alarm time appears on the display.
• The hour digits flash.
• Press the – or + button to adjust the hours.
• Confirm the setting with the SET 1 button.
• The minute digits flash. Press the – or + button to adjust the minutes.
• Confirm the setting with the SET 1 button.
• The set alarm time appears on the display.
20
14:10 Uhr Seite 11
When dark When waking Press the SNOOZE/
LIGHT button
Night Flashing Backlight for
backlight light 10 seconds,
when light is off
Night Flashing Light is
backlight light already on
No Flashing Backlight for
backlight light 10 seconds
No No flashing Backlight for
backlight light 10 seconds
BOOM – High performance radio-controlled alarm clock with vibration alarm
• To activate the alarm function, move the switch Alarm 1 ON/OFF upwards (ON). At the same time,
the point is highlighted in color and around the alarm time a frame appears with the alarm symbol :
• The first alarm time is activated.
• When the set alarm time is reached, the alarm clock will wake you up with the selected settings.
• Press any button to stop the alarm.
• If the alarm is not stopped manually, it will automatically turn off after three minutes.
• The alarm symbol remains on the display and the alarm will be reactivated at the same time.
• When the alarm is active, press the SNOOZE/LIGHT button to activate the snooze function.
• Once the snooze function is activated, will be flashing on the display.
• The alarm will be interrupted for 5 minutes.
• Slide the Alarm 1 ON/OFF switch downwards (OFF), to deactivate the alarm function.
• The alarm symbol and the color mark disappear from the display.
9.1.2 Setting of the second alarm time
• Press the SET 2 button in normal mode.
• 7:00 (default) or the last adjusted alarm time appears on the display.
• Set the alarm time for the second alarm in the same way as the first alarm time.
• To activate/deactivate the second alarm function, move the switch Alarm 2 ON/OFF to the top
(ON)/below (OFF).
9.2 Alarm function selection
• The radio controlled alarm clock has three alarms functions: vibration (optional), alarm tone
(optional) and flashing light.
• Slide the ALARM switch at the back to change between different combinations:
alarm tone only , vibration and alarm tone
• The respective symbol will appear or disappear on the display.
• Attention: The vibration alarm and the flashing light only work with power adapter. If no power
adapter is connected, you can only wake up with an alarm tone, regardless of the position of the
alarm switch.
9.2.1 Wake up with vibration
• Connect the vibration unit. Insert the vibration unit pin into the provided device jack.
• Place the vibration unit preferably between a soft and a solid surface (e.g. a bed drawer or a
mattress) to maximize the vibration effect.
9.3 Volume, frequency and brightness setting
• The radio-controlled alarm clock offers the possibility to adjust the volume and frequency of the
alarm, as well as the flashing light brightness in several stages. Each selection will be presented
immediately.
• Note: One alarm must be active to preview the selection.
, vibration only .
21