Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quicklinks
Vega 900 Handbook
ENGLISH
General Safety Instructions:
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are permitted
to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support systems or
equipment for use in hazardous environments without the express written approval of the Managing Director of TDK-
Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent
personnel.
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2, overvoltage
category II environment. Material Group IIIb PCB's are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label, except
as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at the
end of its service life and in accordance with local regulations.
This product is a component power supply and is only to be installed by qualified persons within other equipment and
must not be operated as a stand alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
This product is a component power supply and does not fall within the scope of the EMC directive. Compliance with
the EMC directive must be considered in the final installation. Please contact your local TDK-Lambda office
RISK OF ELECTRIC SHOCK
High Voltage Warning:
Dangerous voltages are present within the power supply. The professional installer must protect service personnel
from inadvertent contact with these dangerous voltages in the end equipment.
WARNING: When installed in a Class 1 end equipment, this product must be reliably earthed and professionally
installed.
The (+) or (-) output(s) can be earthed or left floating.
The unit cover(s)/chassis must not be made user accessible.
Page 1 of 34
17155 issue 22, June 2016
Werbung
Verwandte Anleitungen für TDK-Lambda Vega 900
Inhaltszusammenfassung für TDK-Lambda Vega 900
- Seite 1 General Safety Instructions: READ SAFETY INSTRUCTIONS Servicing: These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are permitted to carry out repairs. Critical Components: These products are not authorised for use as critical components in nuclear control systems, life support systems or equipment for use in hazardous environments without the express written approval of the Managing Director of TDK- Lambda EMEA.
- Seite 2 An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to TDK-Lambda UK LTD or one of their authorised agents. The mains switch, where fitted, must not be used as the main disconnect device.
- Seite 3 Allgemeine Sicherheitsvorschriften: LESEN SIE DIE SICHERHEITSVORSCHRIFTEN Wartung: Diese Produkte können nicht durch den Kunden gewartet werden. Nur TDK-Lambda UK LTD. und deren zugelassene Vertriebshändler sind zur Durchführung von Reparaturen berechtigt. Kritische Komponenten: Diese Produkte sind nicht für die Verwendung als kritische Komponenten in nuklearen Kontrollsystemen, Lebenserhaltungssystemen oder Geräten in gefährlichen Umgebungen geeignet, sofern dies nicht ausdrücklich und...
- Seite 4 Produkt auf Erdschluss geprüft werden. Eine interne Sicherung schützt das Gerät und darf durch den Benutzer nicht ausgetauscht werden. Im Fall von internen Defekten muss das Gerät an TDK-Lambda UK LTD oder einen der autorisierten Vertriebshändler zurückgeschickt werden. Der Schalter, sofern vorhanden, ist ein unipolares Gerät, das nicht als Hauptschalter zum Trennen des Gerätes verwendet werden darf.
- Seite 5 Consignes générales de sécurité: LIRE LES CONSIGNES DE SECURITE Entretien: Ces produits ne peuvent pas être réparés par l’utilisateur. Seuls, TDK-Lambda UK LTD et ses agents agréés sont autorisés à effectuer des réparations. Composants critiques: Ces produits ne doivent pas être utilisés en tant que composants critiques dans des systèmes de commande nucléaire, dans des systèmes de sauvetage ou dans des équipements utilisés dans des environnements dangereux,...
- Seite 6 Un fusible interne protège le module et ne doit pas être remplacé par l'utilisateur. En cas de défaut interne, le module doit être renvoyé à TDK-Lambda UK LTD ou l'un de ses agents agréés. Le commutateur, s'il est installé, est un commutateur unipolaire et il ne doit pas être utilisé comme coupe-circuit principal.
- Seite 7 Manutenzione: Il cliente non può eseguire alcuna manutenzione su questi prodotti. L'esecuzione delle eventuali riparazioni è consentita solo a TDK-Lambda UK LTD e ai suoi agenti autorizzati. Componenti critici: Non si autorizza l'uso di questi prodotti come componenti critici all'interno di sistemi di controllo nucleari, sistemi necessari alla sopravvivenza o apparecchiature destinate all'impiego in ambienti pericolosi, senza l'esplicita approvazione scritta dell'Amministratore Delegato di TDK-Lambda EMEA.
- Seite 8 Un fusibile interno protegge l'unità e non deve essere sostituito dall'utente. Nell'eventualità di un difetto interno, restituire l'unità a TDK-Lambda UK LTD o a uno dei suoi agenti autorizzati. L'interruttore, se fornito, è un dispositivo unipolare e non deve essere utilizzato come dispositivo principale di scollegamento.
- Seite 9 Instrucciones generales de seguridad: LEA LAS INSTRUCCIONES DE SEGURIDAD Servicio: Estos productos no pueden ser reparados por los clientes. TDK-Lambda UK LTD. y sus agentes autorizados son los únicos que pueden llevar a cabo las reparaciones. Componentes fundamentales: Estos productos no pueden ser utilizados como componentes fundamentales en sistemas de control nuclear, sistemas de soporte vital o equipos a utilizar en entornos peligrosos sin el consentimiento expreso por escrito del Director General de TDK-Lambda EMEA.
- Seite 10 Un fusible interno protege la unidad y este no debe ser nunca reemplazado por el usuario. En caso de existir algún defecto interno, la unidad debe ser enviada a TDK-Lambda UK LTD o a uno de sus agentes autorizados. El interruptor, de estar montado, es un dispositivo monopolar y no debe ser utilizado como dispositivo de desconexión principal.
- Seite 11 Instruções gerais de segurança: LEIA AS INSTRUÇÕES DE SEGURANÇA Manutenção: Estes produtos não são podem ser submetidos a manutenção por parte do cliente. Apenas a TDK-Lambda UK LTD e os seus agentes autorizados têm permissão para realizar reparações. Componentes essenciais: Não é...
- Seite 12 Existe um fusível interno que protege a unidade e que não deve ser substituído pelo utilizador. Em caso de defeito interno, a unidade deve ser devolvida à TDK-Lambda UK LTD ou a um dos seus agentes autorizados. O interruptor, quando instalado, é um dispositivo de pólo simples, não devendo ser utilizado como o dispositivo de desactivação principal.
- Seite 13 These products are NOT suitable for use in the presence of flammable anaesthetic mixtures with air or with oxygen, or with nitrous oxide. • The Vega 900 range provides Reinforced insulation between input and outputs, and functional insulation between outputs and earth. •...
- Seite 14 IEC/EN60950-1, IEC/EN 61010-1 and IEC/EN60601-1 - CB Report and Certificate. CE marking when applied to any Vega 900 product, indicates compliance with the Low Voltage Directive (2014/95/EU) in that it complies with EN60950-1, and with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
- Seite 15 Fast-ons Terminal block If the earth terminal of the Vega 900 PSU is connected to the main incoming earth conductor of the end equipment, the installer must cover the earth symbol with a label bearing the earth symbol of IEC60417-5019.
- Seite 16 Vega 900 Handbook EY = AC fail with PSU & fan enable, 5V/300mA aux supply and fan fail signal FY = AC fail with PSU & fan inhibit, 5V/300mA aux supply and fan fail signal xEW = AC fail with PSU & fan enable and 5-15V/1A aux supply, where x = voltage setting xFW = AC fail with PSU &...
- Seite 17 Vega 900 Handbook Module Options: N, E, P, R, T, L, K, D, V‡ or R‡ Where: N = Inhibit, module good and remote sense E = Enable, module good and remote sense P = Parallel with current share R = Remote sense (twin output modules only)
- Seite 18 Vega 900 Handbook 3.8 – 7.5V 450W > 3.2V 8 – 12.5V 500W > 4.8V 14 – 15V 540W > 5.3V 14 – 19V 570W 37.5A > 6.4V Module Output Current Power Occupied Secondary Ampere Setting for Voltage Slots Turns...
- Seite 19 Vega 900 Handbook 7.6 - 15V 825W >3.2V EE5L 40 – 48V 864W 33.8A >7.1V EE5H 48 - 56 1008 31.3A > 7.7V HH5/3 25.3 – 38V 190W 7.5A >32V HH5/4 32.5 - 52V 4.5A 234W 40.5 >40V Setting for...
- Seite 20 Vega 900 Handbook The total voltage of a seriesed output must not exceed 160Vdc. If any output or seriesed output is non-SELV then all the outputs in the PSU must be considered non-SELV. Non-SELV outputs must be guarded or a deflector fitted during installation to avoid a service engineer making inadvertent contact with the output terminals, or dropping a tool onto them.
- Seite 21 Vega 900 Handbook Customer Air Cooling (option C): The following method must be used for determining the safe operation of PSUs when C option (Customer Air) is fitted, ie fan not fitted to PSU. For PSUs cooled by customer supplied airflow the components listed in the following table must not exceed the temperatures given.
- Seite 22 Adjustment and Derating: The Vega 900 series is designed to provide a max output power of 900W at nominal output voltages (subject to input voltage restrictions). The following procedure must be used to ensure the PSU is operated within its ratings: •...
- Seite 23 Vega 900 Handbook Secondary Options Remote Sense Option Single Output Module “N” Option: Inhibit Internally is a 390Ω resistor in series with a diode of an optocoupler. Drive ≥2mA to inhibit module(max 13mA). Module Good Page 23 of 34 17155 issue 22, June 2016...
- Seite 24 Vega 900 Handbook TWIN Output Module “N” Option TWIN Output Module “R” Option Single Output Module Digital Option Page 24 of 34 17155 issue 22, June 2016...
- Seite 25 Vega 900 Handbook Single Output Wide Range Programmable Option LAYOUT FOR VEGA CONVERTER Page 25 of 34 17155 issue 22, June 2016...
- Seite 26 Vega 900 Handbook LAYOUT OF VEGA TWIN MODULE LAYOUT OF VEGA H5/4 MODULE Page 26 of 34 17155 issue 22, June 2016...
- Seite 27 Vega 900 Handbook LAYOUT OF VEGA SINGLE MODULE LAYOUT OF VEGA DUAL WIDTH MODULE Page 27 of 34 17155 issue 22, June 2016...
- Seite 28 Vega 900 Handbook LAYOUT OF VEGA SINGLE MODULE HIGH CURRENT LAYOUT OF VEGA W5 MODULE Page 28 of 34 17155 issue 22, June 2016...
- Seite 29 Vega 900 Handbook LAYOUT OF VEGA W8 MODULE LAYOUT OF VEGA W9 MODULE Page 29 of 34 17155 issue 22, June 2016...
- Seite 30 Vega 900 Handbook LAYOUT OF VEGA OR-ING MODULE LAYOUT OF VEGA 100mA PRIMARY OPTION Page 30 of 34 17155 issue 22, June 2016...
- Seite 31 Vega 900 Handbook LAYOUT OF VEGA 300mA PRIMARY OPTION LAYOUT OF VEGA 1A PRIMARY OPTION Page 31 of 34 17155 issue 22, June 2016...
- Seite 32 Vega 900 Handbook LAYOUT OF VEGA PRIMARY MICRO OPTION Customer Fixings Customer Air and Fixing Detail Page 32 of 34 17155 issue 22, June 2016...
- Seite 33 Vega 900 Handbook IEC 60320 (Switched) Input Quick Connect (Faston) Input Page 33 of 34 17155 issue 22, June 2016...
- Seite 34 Vega 900 Handbook Right Angle Screw Terminal Input Module Positions TDK-Lambda UK Ltd Kingsley Avenue, Ilfracombe Devon, EX34 8ES Telephone - Sales and Service +44 (0)1271 856666 Head Office and Works +44 (0)1271 856600 Facsimile +44 (0)1271 864894 WEBSITE: www.uk.tdk-lambda.com...