Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Installation
Before mounting and removing the sensor, make sure that no
pressure is applied to the system.
1. Screw the sensor into a G1
process fitting.
2. Tighten the sensor with a
spanner. T ightening tor-
que: 20 Nm.
The housing (A) is freely rotat-
able.
The unit is adaptable for various G1 process fittings (G1 adapters to
be ordered separately as accessories).
• Welding adapter:
Weld the adapter first. Then mount the sensor.
• Prozess adapter:
Mount adapter (C) to the sen-
sor first, then sensor + adapter
to the process connection by
means of a nut, a clamping
flange or similar (B).
20
A
41
B
C
Werbung
