SW-Stahl 72350L Bedienungsanleitung Seite 4

72350L
Delivery
- digital vernier caliper
- 1.5 V button cell
Technical data
Length:
Range:
Resolution:
Accuracy:
Max measuring speed:
Display:
Operating temperature:
Ideal working temperature:
Relative humidity max.:
Care and maintenance
If the LCD screen flashes, the Battery must be replaced. Clean the surface with a dry cotton cloth.
Do not use acetone or alcohol to clean them!
Storage
The tool is too dry and dust-free store in the supplied case,
do not suspend any aggressive substances or liquids.
The maximum storage temperature is 5 to 40 ° C
at a relative humidity. 80%.
Do not store the caliper outdoor
Disposal
If you dispose the device, observe the applicable
safety and environmental protection.
The digital vernier caliper contains material that may
be taken for recycling.
Batteries should be disposed of in accordance with
applicable law.
SW-Stahl und Werkzeugvertriebs GmbH
Leverkuser Strasse 65
D-42897 Remscheid
235 mm
0 - 150 mm / 0 - 6 ˝
0.01mm / 0.0005 ˝
(<100 mm) 0.02 mm / 0.001 ˝
(> 100 - 200 mm) 0.03 mm / 0.001 ˝
1.5 m / sec / 60 ˝ / sec
LCD display
5 ° - +40 ° C
+20 ° C
80%
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de