Panasonic TX-24MSW504 Bedienungsanleitung Seite 11

Using the Menu
Functions
Option
Note: Some of the functions might be unavailable
in certain sources. And for some models, certain
options are not available.
This section explores the menus and settings of your TV.
Each menu is outlined and detailed to help you get the
most from your TV. To access the menu system:
1. In TV mode, press OPTION on the remote control to
display the quick access list.
2. Press ▲/▼ to select the desired item, then press OK
to open the corresponding submenu.
3. ln submenu, use ◄/► and OK buttons to make
theadjustments, or use ▲/▼ to select an item, use OK
to enter and operate according to the on-screendisplay
or guide.
4. Press to return to the previous menu.
Using Quick Access Menu
Picture: Enter to adjust picture mode or advanced
settings.
Sound: Select this option to set the sound adjustments.
Channel: Select this option to adjust the channel.
System: Select this option to adjust the settings.
Picture
Picture Mode: To select the mode of Normal, Dynamic,
Filmmaker, Sport, Game and Custom.
Backlight: Select the level of 1-100.
ECO Setting: To select the Off, Low and High.
Aspect Ratio:
Displays the [Aspect Ratio] screen. Follow the operation
guide to select the mode. [4:3]/[16:9]/Auto/Original.
Advanced Settings:
Color Temperature: To select the Normal, Warm, Cool.
Dynamic Contrast: To select ON or OFF.
HDMI PC/AV Mode: Auto
Overscan: To select ON or OFF
Noise Reduction: To select Off, Low, Medium, High and
Auto.
Picture Reset:To reset the picture.
Gamma: Select 2.2 or 2.4.
Sound
Sound Mode: To select the mode of Standard, Speech,
Music, Stadium and User.
Surround Mode: Select OFF/ Pure Sound/ Surround.
Night Mode: Select ON or OFF.
Sound Only: Select it and the TV screen will turn off in
10 seconds.
Output Device: To select the Speaker, SPDIF and
HDMI-ARC.
Digital Output: Select the PCM/ByPass/Auto.
Advanced Settings:
1. Dialogue Enhanced
2. Dialogue Enhanced Level
3. Balance
4. Digital Audio Delay (ms)
5. Digital Audio Volume
6. Sound Reset
Channel
Note: This function is only available in TV mode.
Channel Scan: Allows you to scan for all available
analog and digital channels.
Digital Channel Setup:
To select the option to adjust the Subtitle Setup, Teletext
Setup, Audio Setup, LCN, Auto Service Update, Update
Scan, HbbTV Settings.
EPG:
Press OK/► to enter the Program Guide menu.
Favourite:
Setup favourite channel list.
Channel Diagnostic:
Press OK/► to display some signal information on
the current digital channel, such as signal strength,
frequency, etc.
Channel Organizer:
This option allows you to organize channels.
System
HDMI CEC Settings:
CEC control: To select On or Off.
Device Auto Power Off: To select On or Off.
Tv Auto Power On: To select On or Off.
CEC Device List: Turn devices on and select [Enable] to
enable control of HDMI devices.
Sleep Timer: To select 15min, 30min, 45min, 60min,
90min, 120min or Off.
Idle TV Standby: To select After 1 hour of inactivity, After
2 hour of inactivity, After 4 hour of inactivity, After 24 hour
of inactivity or Off.
TV Placement: To select Desktop and Wallmount.
Environment: To select Home and Shop.
Shop Mode: To select E-Sticker and None.
11
English