Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HARDWARE INSTALLATION
1. Turn off your computer and all external devices connected to it.
2. Disconnect your computer from the power sources.
3. Open the computer case. Refer to your computer user manual for more details.
4. Find an available PCI-Express 2.0 slot and remove the slot bracket. Save the bracket screw for
later use.
5. Align the controller card horizontally with respect to the slot and insert it into the slot firmly and
evenly. Take care not to force it into the slot. Once you have properly positioned the controller
card into the slot, fasten it to the computer case with the screw you have just saved.
6. Mount the hard disk(s) on the computer case.
7. Connect the power cable to the hard disk(s).
8. Connect the SATA hard disk(s) to the controller card with the SATA cable(s).
9. Connect the computer case's front panel Hard Disk LED cable to pin header JP19 (see
Abbildung 1).
10. Connect the one end of the LED cable (optional) to pin header JP20, and the other end to your
motherboard's HDD LED connector.
11. Secure the computer case and switch on your computer.
Port configuration (optional features)
Please note: all other jumper configurations are not available
1.
Werbung
