Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ultrasonic Aroma Diffuser Use instructions
Cleaning and maintenance
Make sure to unplug the diffuser from the wall socket before performing any cleaning operation. Use a soft cloth
to clean the water tank, and to remove any residue on atomizer.
Note: do not touch the automizer directly by hand, to avoid any damage and malfunction
In case the diffuser is not used for a long period of time, make sure to remove all water and liquid inside the water
tank, clean and dry the water tank and the atomizer thoroughly, then store it in a dry, dust free place.
Troubleshooting
Problem
No power / the diffuser
does not turn on
Auto shut off
No mist / insufficient mist
Technical specifications
Power: 5W
Input: 5 V DC 1.0A USB
For any improvement reason, Beper will reserve the right to modify or improve this appliance without
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
Possible solution
Check that the cable is correctly inserted in the connector on the diffuser; check
the connection between the diffuser and the adapter, and between the adapter
and the wall socket
Check whether the timer has been set; check the level of water inside the water
tank; add water if needed
Check the atomizer for any residue of impurity; make sure the water tank is filled
with water; make sure that the tank lid and outer cover are installed correctly
8
Werbung
