Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. Lift Tek Anleitungen
  4. Autozubehör
  5. ST28
  6. Kurzanleitung

Lift Tek ST28 Kurzanleitung

Vorschau ausblenden
1
2

Quicklinks

Diese Anleitung herunterladen
Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos
Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici
2 doors, 2 portes, 2 türen, 2 puertas, 2 portas, 2 deuren, 2 porte
Pour / For
Seat
Seat Ibiza (1/2002>5/2008)
Versioni / Models / Modelo: Stella - Signo -
Sport] [Solo meccanismo per motori originali
con elettronica / Mechanical part only. Replaces
window regulator already provided with original
motor with electronic box / Solo mecanismo
para motor original con sistema confort
LH 6L3837755G
RH 6L3837756G
LH 6L3837461
RH 6L3837462
14 w01
left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro
THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.
CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.
DIESE MONTAGE-ANLEITUNG IST FÜR DIE BEIDE LINKE UND RECHTE SEITE.
ESTA INSTRUCCION DE MONTAJE ES PARA LOS DOS LADOS IZQUIERDO Y DERECHO.
ESTAS INSTRUÇÕES VALEM TANTO PARA O LADO ESQUERDO QUANTO PARA O DIREITO.
LA PRESENTE ISTRUZIONE VALE SIA PER IL LATO SINISTRO CHE PER IL LATO DESTRO.
ST28
loading

Verwandte Anleitungen für Lift Tek ST28

Inhaltszusammenfassung für Lift Tek ST28

  • Seite 1 Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici 2 doors, 2 portes, 2 türen, 2 puertas, 2 portas, 2 deuren, 2 porte ST28 Pour / For left door - portière gauche - linke tür - puerta lado izquierdo - porta esquerda - linkerportier - porta lato sinistro Seat THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.
  • Seite 2 ST28 16/11/2018 ENGLISH ENGLISH THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. A) WARNING: DO NOT OPERATE THE WINDOW REGULATOR BEFORE IT IS COMPLETELY ASSEMBLY ON VEHICLE. Remove door trim. Detach original wiring from the closing side of the metal panel. Release the glass and remove metal panel from the door. Drill original fixing rivets and remove window regulator. Fix ONLY LOWER SIDE of the two power windows rails onto the panel, into positions 3 and 4 leaving the screws turned out the most as possible.