Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CHAPTER 4
Bios Setup
4.1 About Bios Setup
4.1.1 When To Use Bios Setup?
You may need to run the BIOS Setup when:
•
An error message appears on the screen during the system booting up and is
requested to run SETUP.
•
You want to change the default settings for customized features.
•
You want to reload the default BIOS settings.
4.1.2 How to Run BIOS Setup?
To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during
the POST procedure.
If the message disappears before you respond and you still wish to enter Setup,
either restart the system by turning it OFF and ON, or simultaneously pressing
[Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this chapter are for your
references only.The actual setting screens and options on your Notebook may be
different because of BIOS update.
The setup function only can be invoked by pressing [Del] or [F2] key during POST
that provide a approach to change some setting and configuration the user pre-
fer, and the changed values will save in the NVRAM and will take effect after the
system rebooted. The setup uses a menu interface to allow the user to configure
their system and the features are briefly listed as follow.
Press [F7] key for Boot Menu.
Note: The drivers, BIOS and utilities bundled in the support DVD may
vary by models and are subject to change without notice.
EN
19
Werbung
