Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 4
Push castor into base leg hole with both of your thumbs
The force of both thumbs focus
on the upper arched area (blue
dashed box).
DO NOT SPARE YOUR THUMB
FORCE ONTO THE LOWER
ARCHED AREA (red dashed
box).
. If jammed, pull out the castor, switch to other castors then push it into holes again.
Follow the installation video on Amazon
Step 5
Insert base caps and cylinder into base
→
arched area
Step 6
Arms to seat
FACEDOWN
11
screws M6X40MM*6pcs
12
washer M6X15MM*6pcs
3
Step 7
Tilt control to seat
√
×
13
screws M6X55MM*4pcs
washer M8X17MM*4pcs
14
Step 9
Assemble headrest
17
screws M6X30MM*2pcs
Step 8
Backrest to seat
FACEDOWN
15
screws M8X30MM*3pcs
14
washer M8X17MM*3pcs
washer M8X13MM*3pcs
16
Step 10
4
FACEDOWN
（lay it on the corner
of a desk or on the
packing box）
Werbung
