Space Requirement
Keep enough space of door open.
Keep at least 50mm gap at two sides and back.
Levelling the unit
To do this adjust the two levelling feet at front of the unit. If the unit is not level, the doors and
magnetic seal alignments will not be covered properly.
First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand
new product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Temperature Setting
Plug on your appliance. The internal temperature is
controlled by a thermostat. There are 8 settings . 1 is
warmest setting and 7 is coldest setting and O is off.
The appliance may not operate at the correct temperature
if it is in a particularly hot or if you open the door often.
12
F
Installation
A
550
B
580
C
1650
D
min=50
E
min=50
F
min=50
G
940
H
1180
L
135
o