Weidmuller WM4 C Montageanleitung Seite 12

Installing the plug-in connectors
Installing the plug-in connectors
Step 1: Assembling the cables
Step 2: Crimping the contacts
12
Required tool:
Multi-Stripax PV (1190490000).
Please regard the tool's documentation.
▶ Strip the cable to a length of 8 ±1 mm.
▶ Take care not to damage individual strands of the cable.
Required tool:
Crimping tool PV (1222870000)
Please regard the tool's documentation.
▶ Set the locator to "WM4".
▶ Put the metal contact into the appropriate cavity of the
manual tool according to the cable cross section. The
locator helps you to position the contact properly.
▶ Insert the cable into the crimp area and press the crimp-
ing pliers completely.
▶ Make sure that there is no damage and no sharp edges
on the crimp.
WM4 C 2454640000/02/07.2017